Brocade Communications Systems IP250 user manual Listing zone members, Listing un-zoned members

Zoning administration 19

This identifies the target entity for all subsequent zoning actions and displays the zoning database for the selected entity.

4.Select the zone configuration member (for example, the zone) in the Zone Configurations list that you want to find in the Zones list. (Press SHIFT or CTRL and click each zone configuration member to select more than one zone configuration member.)

5.Click Find < between the Zones list and the Zone Configurations list. If the zone is found, it is highlighted in the Zones list.

Listing zone members

Use this procedure to identify the zone in the active zone configuration of the fabric to which an individual port belongs and the members of that zone.

1.Select Configure > Zoning > Fabric. The Zoning dialog box displays.

2.Click the Zone DB tab if that tab is not automatically displayed.

3.Select a fabric from the Zoning Scope list.

This identifies the target entity for all subsequent zoning actions and displays the zoning database for the selected entity.

4.Right-click in the Potential Members list and select List Zone Members.

The List Zone Members dialog box displays. If the port is a member of a zone, the fabric name, the port name, and WWN zone members display.

5.Click Close to exit the List Zone Members dialog box.

Listing un-zoned members

Use this procedure to identify the device ports in the current fabric that are not part of the active zone configuration.

1.Select Configure > Zoning > Fabric. The Zoning dialog box displays.

2.Click the Zone DB tab if that tab is not automatically displayed.

3.Select a fabric from the Zoning Scope list.

This identifies the target entity for all subsequent zoning actions and displays the zoning database for the selected entity.

4.Right-click in the Potential Members list and select List Un-Zone Members.

The Un-Zone Members dialog box displays. The dialog box shows the fabric name and the connected device ports that are not part of the active zone configuration.

5.Click Close to exit the Un-Zone Members dialog box.

Brocade Network Advisor IP User Manual	667
53-1003056-01