Brocade Communications Systems IP250 user manual Deploying a controller configuration

30 Controller configuration

Deploying a controller configuration

Under GSLB Manager, only the entries under the Controller Configuration tab can be deployed to a ServerIron ADX product that will run the GSLB protocol. Controller configuration deployment can be scheduled or deployed on demand.

To schedule a controller configuration, refer to “Scheduling a deployment” on page 941. To deploy a configuration on demand, complete the following steps.

1.Select Configure > Application Delivery > GSLB.

2.Click the Controller Configuration tab.

3.Select the configuration you want to deploy from the Controller list.

4.Click Deploy.

NOTE

When you deploy a controller configuration, the Management application deletes all GSLB configurations from the ServerIron ADX product to which the configuration is deployed, and then adds the configuration to the ServerIron ADX product. Therefore, make sure you deploy GSLB controller configurations when traffic is least likely to be affected.

The Deployment status progress indicator displays. Wait for the deployment to complete. The configuration remains under the Configuration Controller tab once it is deployed.

940	Brocade Network Advisor IP User Manual
	53-1003056-01