523 | Brocade Communications Systems IP250 manual

Switch, port, and LAG deployment

16

NOTE

On the Deploy to Ports dialog box, you can write port configurations to the switch by enabling the check box at the bottom of the dialog box.

For LAGs:

•LAG attributes (Interface Mode, etc.)

•QoS, DCB Map / Traffic Class Map

•LLDP Profiles

9.Click to move the available targets selected for configuration deployment to the Selected Targets list.

10.Click OK.

The Deployment Status dialog box launches.

11.Click Start on the Deployment Status dialog box to save the changes to the selected devices.

12.Click Close to close the Deployment Status dialog box.

Source to target switch Fabric OS version compatibility for deployment

Table 55 lists the restrictions that exist when deploying source switches to target switches.

TABLE 55	Source to target switch Fabric OS version compatibility

Source Fabric OS version and device		Target Fabric OS version supported	Comments

Fabric OS DCB switch and		Allows Fabric OS DCB switch and	You cannot copy legacy
FCOE10-24 DCB blade with Fabric		FCOE10-24 DCB blade with Fabric	configurations to Fabric OS version
OS version 6.4.2 or earlier.		OS version 6.4.2 or earlier.	7.0 switches, because these
			switches support FCoE maps and
		Excludes Fabric OS Converged 10	can have only one default DCB map.
		Gbe switch module for IBM	Legacy Fabric OS switches,
		BladeCenter with Fabric OS	however, can have more than one
		6.3.1_cee, Fabric OS 6.4.1_fcoe,	default map.

and Fabric OS 6.3.1_dcb.

Fabric OS FCOE10-24 DCB blade with Fabric OS 6.4.1_fcoe

Allows FCOE10-24 DCB blade with Fabric OS 6.4.1_fcoe or Fabric OS 7.0.0.

Allows Fabric OS Converged 10 Gbe switch module for IBM BladeCenter with Fabric OS 6.3.1_cee or Fabric OS 6.3.1_dcb.

Excludes Fabric OS DCB switch and FCOE10-24 DCB blade with Fabric OS 6.4.2 or earlier.

Both the source and the target support only one default DCB map. You can copy QoS, LLDP, and 802.1x configurations from the source to the target.

Fabric OS DCB switch

FCOE10-24 DCB blade with Fabric OS 7.0.

Allows Fabric OS DCB switch and FCOE10-24 DCB blade with Fabric OS 7.0.0.

Excludes all others.

VLAN classifiers are supported, but the FCoE map is not supported on Fabric OS 7.0.0.

Brocade Network Advisor IP User Manual	523
53-1003056-01

Image 575

Brocade Communications Systems IP250 user manual 523

Contents

Brocade Network Advisor Title Publication number Summary of changes Date Brocade Communications Systems, Incorporated Title Publication number Summary of changes Date 53-1003056-01 Contents Chapter Discovery Installing a patch Uninstalling a patch Vii 111 Configurable preferencesManagement groups overview Displaying Network Object view 182 Viewing configured usersUsers overview 181 Dashboard toolbar Accessing a dashboardSetting the dashboard display Dashboard overview 53-1003056-01 Host Product List toolbar IP tab overviewIP main toolbar Product List toolbar 344 Viewing Call Home configurationsCall Home overview System requirements Launching an Telnet session from the IP tab About third-party toolsStarting third-party tools from the application Launching a Telnet session Launching the SMC on Windows Wireless management overviewWireless devices Server Management Console overview Ethernet Fabrics view management VCS mode typesLogical chassis cluster mode discovery VCS Converged Network Adapters Host managementBrocade adapters Host Bus Adapters 481 This chapter Viewing existing PBR policies Adding policies from saved configurationsTelemetry overview Policy-based routing Creating a Layer 2 ACL from a saved configuration Layer 2 access control list managementIronWare Layer 2 ACL configuration Fabric OS Layer 2 ACL configuration Offline zoning Scheduling a security configuration deploymentZoning overview Online zoning 671 Chapter Port Fencing 723 Chapter IP Element Manager 765 743 807 CLI configuration overview777 778 Adding or modifying dual mode ports Default VlanRemote Switched Port Analyzer Configuration requirements for Vlan Manager 843 Mpls pre-configuration 917 VIP Servers overviewVIP Server functions Chapter SSL Certificates for ServerIron Products Xxx 53-1003056-01 Chapter Power Center Chapter Policy Monitor Fault Management Chapter Technical Support This chapter 1213 Configuring packet captures Reports 1277 Dashboard main menus 1261 IP main menus IP shortcut menusLink incident events Product status events 1371 This appendixDatabase tables and fields Xxxviii 53-1003056-01 Xxxix Wirelessinterface Wiredinterface Ceeportinfo How this document is organized About This DocumentThis chapter Xliv 53-1003056-01 Fabric OS hardware and software support Supported hardware and software IronWare hardware and software support Xlvii Xlviii 53-1003056-01 Xlix Network OS hardware and software support What’s new in this document Bold text Document conventionsText formatting Key terms These references are made for informational purposes only Additional informationBrocade resources Other industry resources Document feedback Getting technical help User interface components Getting Started Management server and client Management server and client Logging into a server Clearing previous versions of the remote client Launching a remote client Launching the Configuration Wizard 53-1003056-01 53-1003056-01 Active Sessions dialog box displays Figure Viewing active sessionsSelect Server Active Sessions Select Server Server Properties Disconnecting usersViewing server properties To disconnect a user, complete the following steps Field/Component Description Viewing port statusManagement server and client Server Properties Click Close to close the Server Properties dialog box Server and client ports Tftp UDP TCP 4431,2 Https server Json Menu Item or Function Keyboard Shortcut Accessibility features for the Management applicationAccessibility features for the Management application Keyboard shortcuts Options dialog box displays Setting the look and feelLook and feel customization Select Server Options Changing the font size Connecting to the database using pgAdminPostgreSQL database Selecting File Add Server PostgreSQL database Suse Odbc Data Source Administrator dialog box displaysClick the System DSN tab Click Add Linux version RedHat Package Manager file Save and close the odbcinst.ini file Installing the Odbc driver on Linux systemsOn the Setup psqlODBC screen click Next Adding the Datasourse on Linux systems Select the Connect to an existing database option Testing the connection on Linux systemsExecuting SQL queries from the CLI On the Select database screen, complete the following steps Open Source Software License Type Changing the database user passwordSupported open source software products HP Software Development KIT License Agreement Lgpl BSD Ireasoning Open Source Software License Type Supported open source software products Execute the patch file for your operating system Installing a patchPatches Uninstalling a patch 53-1003056-01 Uninstalling a patch Discovery IP discovery overview IP discovery overview 53-1003056-01 Ietf standard MIB name Required MIB object Data collected Configuration requirementsDiscovery of IPv6 addresses MIB support BRIDGE-MIB MIB-IIIF-MIB Ietf standard MIB name Required MIB object Data collected IP-MIB VDX/VCS discoveryENTITY-MIB 1000000533516242 Network OS discovery IP address formatVCS in-band management interface discovery Mapping VCS in-band management Select File Save Standalone discoveryVCS fabric discovery VCS fabric rediscovery Network OS 2.0 device limitations Seed switch failoverVCS fabric split and merge Logical chassis cluster mode discovery Discover Setup IP dialog box before removal of node How the Management application handles a cluster mode change HyperEdge stack discovery Configuring IP profile discoveryDiscover Setup IP dialog box displays HyperEdge stack discovery Click the Global Settings tab Configuring IP profile discovery Adding SNMPv1 and SNMPv2c credentials Configuring IP simple discoveryConfiguring IP simple discovery IP Snmp credentials Click the Snmp tab IP Snmp credentials CBC-DES Adding SNMPv3 credentialsHMACMD5 Hmacsha Editing SNMPv1 and SNMPv2c credentials Editing SNMPv3 credentials Deleting Snmp credentials from the list Reordering Snmp credentials in the list Adding user credentials Default IP user credentials Default IP user credentials 53-1003056-01 Editing enable prompt user credentials Editing login prompt user credentials To edit an enable super user, complete the following steps Editing enable super user credentials Deleting user credentials from the list Reordering user credentials in the list Click the OID Filter tab IP Object identifier filtersIncluding product types IP Object identifier filters Product sysObjectID Vendor Excluding product types Click the Preferences tab Defining global setting preferencesDefining global setting preferences Deleting product types from the list 53-1003056-01 Reduce the managed count by completing the following steps Configuring event-based collection 53-1003056-01 IP discovery profiles Configuring a discovery profileIP discovery profiles Duplicating a discovery profile Configuring address ranges Select Cidr Subnet from the Entry Type list Adding Cidr subnet addresses Adding IP addresses Adding subnet addresses Excluding subnet addresses Excluding Cidr subnet addresses Excluding IP addresses Editing address ranges Editing IP addresses Editing Cidr subnet addressesEditing subnet addresses Scheduling discovery Configuring an hourly discovery schedule Configuring a one-time discovery schedule Configuring a weekly discovery schedule Configuring a daily discovery schedule Configuring a yearly discovery schedule Configuring a monthly discovery schedule To edit a discovery schedule, complete the following steps Suspending a discovery scheduleEditing a discovery schedule Editing a weekly discovery schedule Editing a one-time discovery scheduleEditing an hourly discovery schedule Editing a daily discovery schedule Editing a yearly discovery schedule Configuring advanced discovery profile preferencesEditing a monthly discovery schedule IP discovery profiles Starting discovery manually Deleting a discovery profileCreating a discovery address file To view discovery status, complete the following steps Starting discovery automaticallyStopping discovery Viewing discovery status Mailing discovery reports Viewing discovery reports Click Discovery Log Exporting discovery reportsViewing the discovery log Individual IP device discovery Individual IP device discoveryAdding an IP device to discovery HMACMD5 Click the SNMPv1/v2c Read/Write tab Click the SNMPv3 Read Only tab Click the Read/Write Credentials tab Editing IP device discoveryClick the SNMPv1/v2c Read Only tab Click the SNMPv3 Read/Write tab Click the SNMPv1/v2c Read/Write. tab Click the SNMPv1/v2c Read Only tab Click the Port Config Credentials tab 53-1003056-01 Select Discover Host Adapters Host discoveryDeleting IP devices from discovery Discovering Hosts by Network address or host name Host discovery Click Close on the Discover Host Adapters dialog box Importing Hosts from a CSV file Host discovery Importing Hosts from a Fabric Importing Hosts from a VM manager Host discovery To edit Host credentials, complete the following steps Editing Host adapter credentials Click Discover Removing a host from active discoveryRediscovering a previously discovered fabric Deleting a host adapter from discovery IconDescription Troubleshooting host discoveryViewing the host discovery state Select Discover VM Managers VM Manager discoveryVM Manager discovery requirements Discovering a VM manager VM Manager discovery Clear to disable vSphere client plug-in registration To edit VM manager discovery, complete the following steps Editing a VM managerClick Close on the Discover VM Managers dialog box Rediscovering a previously discovered VM manager Excluding a host from VM manager discoveryIncluding a host in VM manager discovery Removing a VM manager from active discovery Viewing the VM manager discovery state Deleting a VM manager from discovery Rediscovering IP devices Troubleshooting VM manager discoveryIP Rediscovery Click Rediscover Rediscovering IP devices from the Product List Rediscovering a group Enabling password validation on rediscovery Displaying Network Object view Management GroupsManagement groups overview Product group overview Creating a static product group Static product groups Product group overview Editing a static product group Duplicating a static product group Creating a dynamic product group Dynamic product groups Userdefinedproperty1 up to Select Value or Regular Expression from the Type list Duplicating a dynamic product group Editing a dynamic product group Product Group Properties dialog box displays Viewing product group propertiesViewing test results Performance list Click OK to close the dialog boxProperties tab Products tab Port Groups Port GroupsDeleting a product group Creating a port group Editing a port group Duplicating a port group Ports tab Viewing port group properties Deleting a port group Configurable preferences Application Configuration Server Data backup Select Server Backup in the Category list What is backed up?Management server backup Configuring backup 130 53-1003056-01 Enabling backup Clear the Enable Backup check box Click Apply or OK Disabling backupViewing the backup status Changing the backup interval Select Server Backup in the Category list Click Backup Now Starting immediate backupReviewing backup events Restoring data Server Data restore Restoring data to a new server SAN data collection 136 53-1003056-01 Snmp Product communication protocolsIcmp FTP Netconf To configure event storage, complete the following steps Event storage settingsConfiguring event storage Event storage settings Product communication protocols Select Event Storage in the Category list Flyover settingsConfiguring flyovers Storing historical events purged from repository Options dialog box Flyovers pane, Connection tab Properties table Viewing flyovers Name settingsTurning flyovers on or off Click Fix Duplicates Select Configure NamesFixing duplicate names Viewing names Name settings Select one of the following optionsConfigure Names dialog box displays Figure Adding a name to an existing device Click Apply Names Adding a name to a new deviceApplying a name to a detached WWN Click Export Removing a name from a deviceEditing names Exporting names Click Import Importing NamesSearching for a device by name To import names, complete the following steps Searching for a device by WWN Miscellaneous security settings Select Security Misc in the Category list Configuring the server nameConfiguring login security Registering a server as a Syslog recipient automatically Syslog Registration settingsConfiguring the login banner display Disabling the login banner Registering a server as a Snmp trap recipient automatically Snmp Trap Registration settingsConfiguring the Syslog listing port number Snmp Trap forwarding credential settings Snmp Trap forwarding credential settingsConfiguring the Snmp trap listing port number Configuring Snmp v1 and v2c credentials Configuring Snmp v3 credentials Client/Server IP Software ConfigurationConfiguring the server IP address 156 53-1003056-01 Configuring an explicit server IP address Click OK on the Login Banner Configuring the application to use dual network cards IP preferences Software ConfigurationYou can configure the following preferences for IP products Configuring change manager preferences Configuring deployment report preferences Configuring custom report preferencesConfiguring deployment preferences Configuring Mpls polling service preferences Configuring IP device manager preferencesConfiguring image repository preferences Configuring Mpls management preferences Configuring sFlow data collector preferences Configuring name service preferencesConfiguring polling service preferences Configuring sFlow accounting preferences Configuring SSL certificates preferences Configuring sFlow monitoring preferences Configuring Tftp preferences Configuring Snmp preferencesConfiguring syslog file reader preferences Configuring memory allocation settings Memory allocation settings Server Heap Size Configuring asset polling Viewing the network size status Product communication settingsConfiguring SAN communication Select the Connect using Https Http over SSL only option Configuring the preferred IP formatSelect the Connect using Http option Configuring IP communication Http FTP/SCP/SFTP server settings Configuring an internal FTP server Accessing the FTP server folder Configuring an internal SCP or Sftp server Select the Use External FTP Server and/or SCP Server option Configuring an external FTP, SCP, or Sftp server Select FTP/SCP/SFTP in the Category list Testing the FTP, SCP, and Sftp serverSelect SCP from the Preferred Protocol Secured list Select Sftp from the Preferred Protocol Secured list To configure server settings, complete the following steps Server port settingsConfiguring the server port Options dialog box displays Figure Support mode settingsConfiguring support mode settings Select Support Mode in the Category list Configuring the server log file purge limit Fips Support Users overview User Account Management Users dialog box displays Click the Users tab, if necessary Viewing configured usersTo view configured users, complete the following steps Select Server Users 183 184 53-1003056-01 To create a new user account, complete the following steps User accountsCreating a new user account User accounts 186 53-1003056-01 Copying a user account Editing a user account Copying and pasting user preferences Disabling a user account To re-activate a user account, complete the following steps Enabling a user accountDeleting a user account Unlocking a user account To create a new role, complete the following steps RolesCreating a new role Roles Copying a role Editing a role To delete a role, complete the following steps Deleting a roleAdding privileges to a role Areas of responsibility Areas of responsibilityRemoving privileges from a role Creating an AOR Copying an AOR Editing an AOR Assigning products to an AOR Deleting an AOR Users dialog box displays Click the Policy tab Password policiesConfiguring a password policy Removing products from an AOR 199 Viewing password policy violators Click View Policy Violators Authentication Server Groups on the Management serverClick the Authentication Server Groups tab Assigning roles and AORs to an AD group To load an AD group, complete the following steps Removing roles and AORs from an AD groupLoading an AD group Close the Active Directory Users and Computers dialog box Deleting an AD groupCreating an AD user account Open the Active Directory Users and Computers console Defining user accounts on the external Ldap server Configuring roles and AORs on the external Ldap serverAssigning an AD user to an AD group Select Start Run Type adsiedit.msc and press Enter User profilesClick OK Close the Management console Click OK on the User Profile dialog box User profiles Configure CLI credentialsViewing your user profile Select Server User Profile To edit your user profile, complete the following steps Changing your passwordEditing your user profile User profiles To view your password policy, complete the following steps Viewing your password policy Click Optional Messages Reset Resetting optional messagesConfiguring e-mail notification Configuring CLI credentials Configuring the CLI credential policy Dashboard overview Dashboard Management 212 53-1003056-01 Toolbar Dashboard toolbar Dashboards expand navigation bar Dashboard messages General dashboard functions Accessing a dashboard Creating a user-defined dashboard Filtering the dashboards list Customizing the dashboard widgets and monitors Setting the dashboard displayDeleting a user-defined dashboard 218 53-1003056-01 Attaching and detaching the Dashboard tab Exporting the dashboard displayPrinting the dashboard display Setting the network scope Creating a customized network scope Deleting a user-defined network scope Setting the data display time frameEditing a user-defined network scope IP Port Health Default dashboardsProduct Status and Traffic dashboard Status widgets Access Point Status widgetStatus widgets Color Type Customizing the Access Point Status widget ColorSeverity Events widget Customizing the Events widget Accessing additional data from the Events widget Customizing the Host Adapter Inventory widget Host Adapter Inventory widget IP Inventory widget Customizing the IP Inventory widget Accessing additional data from the IP Inventory widget IP Status widget IP Status widget displays the device status as a pie chart Viewing additional IP product data Accessing additional data from the IP Status widget Fabric Watch widgets Fabric Watch widgetsStatus widget Out of Range Violations widget Customizing the Out of Range Violations widget Port Health Violations widget Customizing the Port Health Violations widget Monitor title Description Data collectors Accessing additional data from the widgetPerformance monitors Click the Customize Dashboard icon Performance monitors Preconfigure performance monitorsDisplaying monitors on the Performance Dashboard Performance monitors Click OK Top Port Alignment Errors monitorAccessing additional data from top or bottom port monitors Performance monitors Top Port C3 Discards monitor Top Port C3 Discards RX to monitor Top Port CRC Errors monitor 243 Top Port Discards monitor Accessing additional data from the Top Port Discards monitor Top Port Encode Error Out monitor Top Port Errors monitor Top Port Errors monitor Accessing additional data from the Top Port Errors monitor Top Port Overflow Errors monitor Top Port Receive EOF monitor Top Port Runtime Errors monitor Top Port Sync Losses monitor Top Port Too Long Errors monitor Top Port Traffic monitor Accessing additional data from the Top Port Traffic monitor Top Port Underflow Errors monitor Top Port Utilization Percentage monitor 255 Bottom Port Utilization Percentage monitor Top Product CPU Utilization monitor Top Product Memory Utilization monitor Top Product Response Time monitor Top Product Temperature monitor 261 Top Products with Unused Ports monitor Editing a preconfigured performance monitor Measures User-defined performance monitorsMonitor types Top or bottom product performance monitors Top or bottom port performance monitors Distribution performance monitors Port measures types User-defined performance monitors Time series performance monitors Accessing additional data from the Distribution monitors Add Performance Dashboard Monitor dialog box displays Configuring a user-defined product performance monitorAccessing additional data from the sFlow monitors Top sFlows performance monitors 271 Click OK on the Add Performance Dashboard Monitor dialog box Adding targets to a user-defined performance monitor Performance Dashboard Monitor Targets dialog box displays Configuring a user-defined port performance monitor 274 53-1003056-01 MAC Vlan Configuring a user-defined sFlow performance monitor Viewing product distribution data details Viewing port distribution data details Configuring a monitor from a performance graph Utilization Legend View Management IP tab overview Main toolbar IP main toolbar Product List toolbar Topology Map toolbar Host Product List toolbar IP Product List Host topology map toolbar Product List functions Topology Map 286 53-1003056-01 Keyboard Shortcut Description Master LogIP tab overview Topology keyboard shortcuts Anchoring or floating the Minimap Minimap Resizing the Minimap Status bar IP product icons Icon legend CNA Host product iconsIcon legend Vlan Event icons IP group iconsIP port icons IP product status icons Customizing the main window Customizing the main windowZooming in and out of the Connectivity Map Zooming Displaying columns Exporting the topologyCustomizing application tables Zooming out Changing the order of columns Exporting table information Resizing the columnsSorting table information Copying table information Expanding and collapsing tables Product List customizationAdding a property label Searching for information in a table Deleting a property label Editing a property label Searching for a device Search Restricting a search by node Address Finder Address FinderSearching for an exact match Clearing search results Address Finder dialog box displays Finding IP addressesSelect Tools Address Finder 303 Finding MAC addresses 305 IP topology view manager Network Object view functions Network Objects view Network Objects view Filtering devices in the Network Objects Product ListClearing the Network Objects Product List filter IP Topology view IP Topology viewL2 Topology view Ethernet Fabrics view Ethernet Fabrics viewVlan Topology view STP/RSTP topology ElementDescription Viewing STP/RSTP topology Element Description Generating an STP/RSTP ReportExporting an STP/RSTP Report Vlan Topology view STP/RSTP Topology map elements Host Topology view Click Save Host Topology viewMailing an STP/RSTP Report 314 53-1003056-01 IP topology map components IP topology map componentsTopology map elements Connections Icon Description ProductsLogical Topology map layout Viewing flyovers on the topology map Orthogonal Organic Hierarchical Orthogonal Merge Lines Free Form Selecting a topology map layoutCircular Creating a customized layout Creating customized topology links Customizing the Topology Map Adding a background image to a map Click OK on the Topology Background Map dialog box Deleting a background image from the library Select Portrait or Landscape from the Orientation area Printing a map Enabling port actions Port actions Port actions Disabling port actionsDisplaying port properties for an attached device Accessing performance monitoring 330 53-1003056-01 MRP Topology overview MRP Topology Viewing a MRP Topology map Master Viewing a MRP ring Viewing a MRP ring MRP Topology map elements Error Selecting a topology map layout Configuring the application to show a dashed line 336 53-1003056-01 337 Creating a customized layout Enter the ring ID, for example, Ring Customizing the MRP Topology mapClick the Starting Point row Click Close on the MRP Topology Options dialog box Refreshing MRP Topology dataViewing MRP properties 341 Viewing MRP properties Call Home Call Home System requirements Viewing Call Home configurations 346 347 To show a Call Home center, complete the following steps Showing a Call Home centerHiding a Call Home center Showing a Call Home center Click Edit Centers beneath the Call Home Centers list Editing a Call Home centerEditing the IBM Call Home center Click Edit Centers beneath the Call Home Centers table Backup Connection fieldEditing an e-mail Call Home center Primary Connection field Enter a password in the Smtp Server Settings Password field Enter a user name in the Smtp Server Settings Username field Call Home alert e-mail messages  Fcip Editing the EMC Call Home center Editing the HP LAN Call Home center Enabling supportSave To enable a Call Home center, complete the following stepsEnabling a Call Home center Select Monitor Event Notification Call Home Testing the Call Home center connectionTesting the Call Home center connection Disabling a Call Home center Viewing Call Home status Viewing Call Home status Assigning a device to the Call Home center Assigning a device to the Call Home centerRemoving a device from a Call Home center Removing all devices and filters from a Call Home center Click OK on the Call Home Event Filter dialog box Defining an event filterTo define an event filter, complete the following steps Assigning an event filter to a Call Home center Assigning an event filter to a Call Home centerAssigning an event filter to a device Overwriting an assigned event filter Overwriting an assigned event filterRemoving all event filter from a Call Home center Removing an event filter from a device Removing an event filter from a deviceSearching for an assigned event filter Searching for an assigned event filter Starting third-party tools from the application Third-party toolsAbout third-party tools Select Tools Product Menu ToolName Launching a Telnet sessionLaunching an Element Manager Launching an Telnet session from the IP tab Adding a tool Select Configure Element Manager HCM. HCM Agent displaysSelect Tools Setup Launching HCM Agent Entering the server IP address of a tool Adding an option to the Tools menu Removing an option from the Tools menu Changing an option on the Tools menu Adding an option to a device’s shortcut menu Changing an option on a device’s shortcut menu Removing an option from a device’s shortcut menu 374 53-1003056-01 Launching the SMC on Windows Server Management ConsoleServer Management Console overview Launching the SMC on Linux Services tabMonitoring and managing Management application services Services tab Click Stop Cimom Stopping all servicesStopping the Cimom services Refreshing the server status Click Change Database Password Starting all servicesRestarting all services Changing the database password Viewing server port numbers Ports tab Select Radius Server from the Primary Authentication list AAA Settings tabConfiguring Radius server authentication AAA Settings tab Local Database Configuring a Radius server Configuring Ldap server authentication Select Ldap Server from the Primary Authentication list Configuring an Ldap server For Primary Authentication, select TACACS+ Server Configuring TACACS+ server authentication Configuring a TACACS+ server Configuring Common Access Card authentication Select CAC from the Primary Authentication list For Primary Authentication, select Switch Configuring switch authentication For Primary Authentication, select Windows Domain Configuring Windows authentication Authentication Audit Trail log displays Configuring local database authenticationDisplaying the client authentication audit trail For Primary Authentication, select Local Database Capturing technical support information Restore tabTechnical Support Information tab Restoring the database Upgrading HCM on the Management server HCM Upgrade tabTo upgrade HCM, complete the following steps SMI Agent Configuration Tool Select the HCM Upgrade tab SMI Agent Configuration Tool Management Console dialog box Launching the Smia configuration tool on WindowsSMI Agent Configuration Tool Smia Configuration Tool dialog box Launching the Smia configuration tool on Unix Smia Configuration Tool dialog box displays Launching a remote Smia configuration toolService Location Protocol SLP support Slptool commands SLP file locations on Unix systems SLP on Unix systems SLP file locations on Windows systems SLP on Windows systems Home tab Authentication tab Authentication tab Click the Authentication tab Configuring Cimom server authentication Cimom tab Configuring the SMI Agent port number Configuring the Cimom Bind Network Address Configuring the Cimom log Click the Certificate Management tab Certificate Management tabTo import a certificate, complete the following steps Exporting a certificate Viewing a certificate Deleting a certificate Summary tab SMI Agent Configuration Tool Click the Summary tab Licensed Ports Log LevelManaged Ports 412 53-1003056-01 Wireless management overview Wireless Management Device Name Firmware required Wireless devicesWireless device discovery Wireless devices on the dashboard Wireless devices on the dashboard View management Wireless device propertiesView management Element Manager Launching the Element Manager Browser and system requirements Launching a Telnet session Configuration repository and backup management Save and close the file CLI configuration management Vlan management Cluster mode Policy Monitors Fault managementPerformance management AP Products report Contact StatusFirmware version Location 424 53-1003056-01 VCS VCS Management Fabric cluster mode VCS mode types This section contains these topics Logical chassis cluster mode discoveryLogical chassis cluster operations Ethernet Fabrics view management 428 53-1003056-01 429 Serial firmware update and activation for Network OS devices Network OS Support for Network OS VDX 2740 embedded switch Dynamic product group VCS product groupsPort profiles Static product group Port profile Vlan profile QoS profile Ampp characteristicsLife of a port profile Ampp event Applicable behavior and failures Ampp events and behavior Assigning MAC addresses to a port profile Port profile configuration using the management application Click Add Offline MACs Managing offline MAC addressesRelated topics Click Add Assign MACs dialog box displays Comparing port profiles Profile Comparison Summary dialog box Profile Properties Vlan SettingsProfile Comparison Summary list Deploying port profiles QoS SettingsACL Settings FCoE Settings FRU monitoring System Monitor support on Network OS VDX platforms Resource monitoring System thresholdsAlert notifications SFP parameter Description Suggested SFP impact SFP parameter monitoringSecurity monitoring Port statistics monitoring Interface error types To diagnose traceroute, you can do either of the following Select Monitor Diagnostics TracerouteEthernet fabric traceroute Tracing Ethernet fabric routes Source address format Condition TCP UDP Request Source port number Destination port number Ethernet fabric traceroute Trace Route example Browse to the directory where you want to save the data Exporting diagnostic data 450 53-1003056-01 Host management Host Management Model number Description Brocade adaptersHost Bus Adapters Following sections describe the three Brocade adapter types Fabric Adapters Converged Network Adapters HCM software HCM softwareAnyIOTM technology HCM features Click Add on the Discover VM Managers dialog box Host adapter discoveryVM Manager Adding a VM Manager ESXi CIM listener ports HCM and Management application support on ESXi systemsDeleting a VM Manager Add Host Adapters dialog box Adding host adapter credentials for ESXi Select CIM server ESXi only as the Contact option Select Host Adapter Software from the Configure menuAdapter software Adapter software Importing a driver into the repository Driver repository Deleting a driver file from the repository Boot image repository Boot Image Management dialog box Importing a boot image into the repository Click Import on the Boot Image Repository dialog box Downloading a boot image to a selected host Backing up boot image files Bulk port configurationConfiguring host adapter ports Deleting a boot image from the repository Add Port Configuration dialog box, shown in , displays Adding a port configurationBulk port configuration Click Add on the Configure Host Adapter Ports dialog box 466 53-1003056-01 Adapter Port Configuration Status dialog box displays Deleting a port configuration Configuring FAWWNs on switch portsEditing a port configuration Duplicating a port configuration Click Start to save the changes to the switch Enabling the Fawwn feature on a switch or AG portsDisabling the Fawwn feature on a switch or AG ports Select Configure Fabric Assigned WWN. or Modifying a Fawwn on a switch or AG port Auto-assigning a Fawwn to a switch or AG portManually assigning a Fawwn to a switch or AG port FAWWNs on attached AG ports Deleting a Fawwn from a switch or AG port Click the Attached AG Ports tab Moving an AG port Fawwn across switchesAdding AG port FAWWNs Deleting AG port FAWWNs Host adapter management privileges Role-based access controlHost adapter administrator privileges Role-based access control FC port measures HBA port measures CNA port measures Host performance management Host security authentication Counters Host security authentication Host security authentication Adapter events Host fault managementSupportSave on adapters Syslog forwarding Host fault managementFiltering event notifications Select the Include FTP Root directory check box Backup supportConfiguring backup to a hard drive Select the Enable Backup check box Click Apply or OK FCoE overview Fibre Channel over Ethernet Enhanced Transmission Selection Enhanced Ethernet featuresEnhanced Ethernet features Dcbx protocol FCoE protocols FCoE protocols supportedEthernet jumbo frames Ethernet link layer protocols supported FCoE licensing Saving running configurationsCopying switch configurations to selected switches Saving running configurations Device type Configuration possibilities DCB configuration management Lldp profiles Switch policiesSwitch policies DCB map and Traffic Class map DCB configuration DCB configurationMinimum DCB configuration for FCoE traffic Creating a DCB map to carry the LAN and SAN traffic Select Configure DCB To configure LLDP, complete the following steps Configuring Lldp To configure the DCB interface, complete the following steps Creating the FCoE Vlan to carry FCoE traffic Select Assign the Global ConfigurationSelect Configure Element Manager Admin Apply the Vlan classifier group to the DCB interface Save the running-config file to the startup-config fileAdding a LAG Add LAG or Edit LAG dialog box displays, as shown in Figure L2 Mode Select Access or TrunkClick Add LAG or Edit LAG Editing a DCB switch Editing a DCB port 497 Editing a LAG 499 Enabling a DCB port or LAG Deleting a LAG QoS configuration Priority group ID Strict priority No bandwidth % configuration AllowedCreating a DCB map Off 503 Deleting a DCB map Editing a DCB map Assigning a DCB map to a port or link aggregation group QoS configuration Select Traffic Class from the Map Type list Creating a Traffic Class mapEditing a Traffic Class map Deleting a Traffic Class map Select Traffic Class in the Map Type list Changing the Vlan ID on the default FCoE mapFCoE provisioning FCoE provisioning Enabling or disabling the FCoE map on the port Adding a Vlan classifier rule Vlan classifier configuration Vlan classifier configuration Deleting a Vlan classifier rule Editing a Vlan classifier rule Deleting a Vlan classifier group Creating a Vlan classifier group LLDP-DCBX configuration LLDP-DCBX configurationConfiguring Lldp for FCoE 515 Deleting an Lldp profile Editing an Lldp profile Assigning an Lldp profile to a port or ports in a LAG 802.1x authentication802.1x authentication 16 802.1x authentication Enabling 802.1x authenticationDisabling 802.1x authentication Setting 802.1x parameters for a port 519 Switch, port, and LAG deployment Switch, port, and LAG deploymentDeploying DCB product, port, and LAG configurations Deploy to Ports dialog box 522 53-1003056-01 523 Network OS switches in VCS mode Supported VCS platforms Viewing switches in VCS modeNetwork OS switches in VCS mode Viewing FCoE parameters on the Network OS switch Viewing QoS parameters on the Network OS switch Lldp Profiles list Viewing LLDP-DCBX parameters on the Network OS switchAvailable Rules Vlan Classifiers Viewing port parameters on the Network OS switch port Viewing ports in VCS modeViewing the 802.1x parameter on the Network OS switch QoS-DCB Viewing QoS parameters on the Network OS switch portQoS DCB parameters on the Network OS switch port QoS Non-DCB Viewing FCoE parameters on the Network OS switch portQoS non-DCB parameters on the Network OS switch port Viewing the 802.1x parameter on the Network OS switch port Viewing LLDP-DCBX parameters on the Network OS switch port Port Control Viewing LAGs in VCS modeViewing LAG parameters on the Network OS switch LAG Re-authentication Interval sec Minimum Links Viewing QoS parameters on the Network OS switch LAGQoS DCB parameters on the Network OS switch LAG Type QoS non-DCB parameters on the Network OS switch LAG Viewing FCoE parameters on the Network OS switch LAG Enable LLDP-DCBX check box Viewing LLDP-DCBX parameters on the Network OS switch LAG DCB performance DCB performanceReal-time performance graph Generating a real-time performance graph from the SAN tab Generating a historical performance graph Historical performance graphGenerating a real-time performance graph from the IP tab Historical Performance Graph dialog box displays FCoE login groupsHistorical performance report Generating a historical performance report 539 FCoE login groups Adding an FCoE login group FCoE Login Group Confirmation and Status dialog displays Editing an FCoE login groupFCoE login groups Click OK Select a group from the Login Groups list and click Delete Deleting one or more FCoE login groupsDisabling the FCoE login management feature on a switch Viewing virtual FCoE ports Virtual FCoE port configurationEnabling the FCoE login management feature on a switch Virtual FCoE port configuration Virtual FCoE Ports tab displays, as shown in Figure Clearing a stale entrySelect the Virtual FCoE Ports tab 545 546 53-1003056-01 Policy-based routing TelemetryTelemetry overview Viewing existing PBR policies 549 Adding rules to a policy Adding a new policy 551 Editing a rule Adding policies from saved configurationsEditing a policy Deploying a PBR policy on demand Deleting a policy or rule Select Save deployment only Saving a PBR policy deploymentClick OK on the Deploy to Products PBR dialog box Scheduling a PBR policy deployment Configuring an hourly deployment schedule Configuring a one-time deployment schedule Configuring a monthly deployment schedule Configuring a daily deployment scheduleConfiguring a weekly deployment schedule Enabling or disabling ACL accounting Resetting ACL countersConfigure Security ACL Accounting ACL Accounting Click OK on the Port Selection Layer 2/3 ACL dialog box Viewing ACL countersSelect the Clear all counters on device check box Port Selection Layer 2/3 ACL dialog box displays 560 53-1003056-01 Security overview Layer 2 access control list managementSecurity Management Add Layer 2 ACL Configuration dialog box displays IronWare Layer 2 ACL configurationCreating a Layer 2 ACL configuration IronWare MAC Click OK on the Add Layer 2 ACL Configuration dialog box Editing a Layer 2 ACL configuration IronWare Copying a Layer 2 ACL configuration IronWare 566 53-1003056-01 567 Select the Clear ACL Assignment option Clearing Layer 2 ACL assignments IronWare DeviceName Layer 2 ACL Configuration dialog box displays Fabric OS Layer 2 ACL configurationCreating a standard Layer 2 ACL configuration Fabric OS Click OK on the Edit Layer 2 ACL Configuration dialog box Editing a standard Layer 2 ACL configuration Fabric OSCopying a standard Layer 2 ACL configuration Fabric OS Select Extended from the Type list Creating an extended Layer 2 ACL configuration Fabric OS 572 53-1003056-01 Copying an extended Layer 2 ACL configuration Fabric OS Editing an extended Layer 2 ACL configuration Fabric OS 574 53-1003056-01 Clearing Layer 2 ACL assignments Fabric OS Deleting a Layer 2 ACL configuration from the switch Creating a Layer 2 ACL from a saved configurationDeleting a Layer 2 ACL configuration from the application Viewing Layer 2 ACL configuration on a fabric Network OS Network OS Layer 2 ACL configuration Viewing Layer 2 ACL configuration on a device Network OS Viewing Layer 2 ACL configuration on an interface Network OS Click OK on the Port Selection Layer 2 ACL dialog box Layer 3 access control list policy Creating a standard L3 ACL configuration Add L3 ACL Configuration dialog box displays Layer 3 access control list policy Click OK on the Add L3 ACL Configuration dialog box Creating a L3 ACL from a saved configuration Click OK on the Edit L3 ACL Configuration dialog box Editing a standard L3 ACL configurationEdit L3 ACL Configuration dialog box displays Click Duplicate Copying a standard L3 ACL configurationCreating an extended L3 ACL configuration Click OK on the Duplicate L3 ACL Configuration dialog box 586 53-1003056-01 L3 ACL Advanced Settings dialog box displays Editing an extended L3 ACL configuration Copying an extended L3 ACL configuration 589 Add L3 ACL IPv6 Configuration dialog box displays Creating an IPv6 L3 ACL configuration Click OK on the Add L3 ACL IPv 6 Configuration dialog box Editing an IPv6 L3 ACL configuration Copying an IPv6 L3 ACL configuration Click OK on the DeviceName L3 ACL Configuration dialog box Deleting a L3 ACL configurationAssigning a L3 ACL configuration to an interface 595 Clearing L3 ACL assignments Configuring hit statistics Configuring the ACL configuration type and operations Configuring L3 ACL advanced settings 599 600 53-1003056-01 3qosp3time-exceeded To view all existing networks, complete the following steps Network configurationViewing existing networks Creating a network Layer 3 access control list policy Click the Networks tab Editing a network Deleting a network Copying a network Viewing existing network groups Network group configuration Click the Network Groups tab Creating a network groupReview the List of Network Groups table To create a network group, complete the following steps To edit a network group, complete the following steps Editing a network group To copy a network group, complete the following steps Copying a network group Click OK on the Duplicate Network Group dialog box To delete a network group, complete the following steps Service configurationDeleting a network group Viewing existing services TCP UDP Creating a service Copying a service Editing a service Deleting a service Review the List of Service Groups table Service group configurationViewing existing service groups Click the Service Groups tab Click Add Add Service Group dialog box displays Creating a service groupTo create a service group, complete the following steps To edit a service, complete the following steps Editing a service group Click OK on the Duplicate Service Group dialog box Copying a service groupTo copy a service, complete the following steps Media Access Control MAC filter management Media Access Control MAC filter managementDeleting a service group Creating a MAC filter configuration Add MAC Filter dialog box Creating a MAC filter from a saved configuration Editing a MAC filter Click OK on the MAC Filter Saved Configurations dialog box Copying a MAC filter 626 53-1003056-01 Assigning MAC filters Deleting a MAC filter Clearing MAC filter assignments Adding a MAC filter configuration to an interface Security configuration deployment Security configuration deployment Deploying a security configuration on demand Click OK on the Deploy to Products Layer 2 ACL dialog box Saving a security configuration deployment Deploy to Product/Ports dialog box Scheduling a security configuration deployment Select an ACL in the list and click Edit Edit Layer 2 ACL Configuration dialog box displays 634 53-1003056-01 635 636 53-1003056-01 Zoning overview Zoning Green Zone Online zoning Zoning naming conventions Offline zoning Zone database size Zoning configurationConfiguring zoning Zone database size Click New Zone Creating a zoneViewing zone properties Adding members to a zone Zoning configurationSelect Save to Switch from the Zone DB Operation list Click New Member Creating a member in a zoneRemoving a member from a zone Renaming a zone Duplicating a zone Deleting a zone Click Zoning Policies Enabling or disabling the default zone for fabricsSelect Configure Zoning Fabric Customizing the zone member display Click New Alias Creating a zone aliasEditing a zone alias Removing an object from a zone alias Click Export Alias Exporting zone aliasesRenaming a zone alias Deleting a zone alias Duplicating a zone alias Creating a zone configurationClick New Configuration Zone Configuration Properties dialog box displays Viewing zone configuration propertiesAdding zones to a zone configuration Removing a zone from a zone configuration Click Activate Activating a zone configuration Click Deactivate Deactivating a zone configurationClick the Active Zone Configuration tab Deleting a zone configuration Renaming a zone configuration Creating an offline zone database Duplicating a zone configuration Select Delete from the Zone DB Operation list Deleting an offline zone database Select Refresh from the Zone DB Operation list Refreshing a zone databaseMerging fabrics Select Compare from the Zone DB Operation list Merging two zone databases Creating a common active zone configuration in two fabrics Select an offline zone database from the Zone DB list Saving a zone database to a switchExporting an offline zone database You cannot export an online zone database Rolling back changes to the offline zone database Zoning administrationImporting an offline zone database To compare two zone databases, complete the following steps Comparing zone databases Managing zone configuration comparison alerts Clearing the fabric zone database Setting change limits on zoning activation Select Undo CheckOut from the Zone DB Operation list Removing all user names from a zone databaseFinding a member in one or more zones Select Clear All from the Zone DB Operation list Finding a zone member in the potential member list Finding zones in a zone configurationFinding a zone configuration member in the zones list Listing un-zoned members Listing zone members Click OK on the Offline Device Management dialog box Removing an offline deviceReplacing zone members Replacing an offline device by name Replacing an offline device by WWN 670 53-1003056-01 About port fencing Port Fencing About port fencing Viewing port fencing configurations 673 Thresholds C3 Discard Frames threshold Invalid words threshold Link Reset thresholdProtocol error threshold Invalid CRCs threshold Adding thresholds Adding thresholdsState Change threshold Adding a C3 Discard Frames threshold Add C3 Discard Frames Threshold dialog box displays Port Fencing dialog box Add Invalid CRCs Threshold dialog box displays Adding an Invalid CRCs threshold Add Invalid Words Threshold dialog box displays Adding an Invalid Words threshold Adding a Link Reset threshold Add Link Reset Threshold dialog box displays Add Protocol Error Threshold dialog box displays Adding a Protocol Error thresholdSelect Protocol Error from the Violation Type list Add State Change Threshold dialog box displays Adding a State Change threshold Assigning thresholds Avoiding port fencing inheritance Unblocking a port Click OK on the Edit C3 Discard Frames Threshold dialog box Editing thresholdsEditing a C3 Discard Frames threshold Click OK on the Edit Invalid CRCs Threshold dialog box Editing an Invalid CRCs thresholdEditing an Invalid Words threshold Editing thresholds Click OK on the Edit Invalid Words Threshold dialog box Editing a Link Reset thresholdEditing a Protocol Error threshold Click OK on the Edit Link Reset Threshold dialog box Editing a State Change threshold Click OK on the Edit Protocol Error Threshold dialog box Viewing all thresholds on a specific Fabric OS device Finding assigned thresholdsViewing thresholds Removing thresholds from individual objects Removing thresholds Removing thresholds from the thresholds table Removing thresholds Ficon Environments Ficon configurations Configuring a switch for Ficon operation Configuring a switch for Ficon operationPlanning the configuration 697 Select Discover Fabrics Configuring the switch Click Add License Click Download 701 Configuring an Allow/Prohibit Matrix Configuring Ficon display 703 Manual Allow/Prohibit dialog box displays, as shown in on Configuring an Allow/Prohibit Matrix manuallyClick Analyze Zone Conflicts Click Manual Allow/Prohibit Click OK on the Manual Allow/Prohibit dialog box Save As/Duplicate dialog box displays, as shown in on Copying an Allow/Prohibit Matrix configuration 707 Confirmation message displays, as shown in on Activating an Allow/Prohibit Matrix configurationDeleting an Allow/Prohibit Matrix configuration Activating an Allow/Prohibit Matrix configuration Clearing port names Changing the Allow/Prohibit Matrix displayCascaded Ficon fabric Changing window arrangement Configuring a cascaded Ficon fabric Cascaded Ficon fabric Enabling DLS Cascaded Ficon fabric merge 713 Merging two cascaded Ficon fabrics Set up merge options screen displays TOV Specify the Cable length between switch portsRange is form 10 through 500 km. The default is 50 km Resolving merge conflicts 717 To view port groups, complete the following steps Select Configure Port GroupsViewing port groups Port Groups dialog box displays, as shown in on To edit a port group, complete the following steps Swapping blades Click OK Swapping blades 721 722 53-1003056-01 Element Manager CLI IP Element ManagerElement Manager overview Element Manager CLI Accessing the IP Element Manager CLI Element Manager interface overview Accessing the Element Manager interfaceSelect Configure Element Manager GUI Element Manager interface overview Build Label Switch propertiesSerial # Port Count 727 Properties dialog box Ports tab Element Manager toolbar Displaying port properties Port Mode Tx PowerRx Power Temperature Tx Bias Current You can compare physical and virtual port properties Comparing physical port propertiesComparing physical and virtual port properties Comparing physical and virtual port properties Table capabilities Status indicator iconsSearch Real Time Graph/Table Historical Graph/Table Performance dataReal-time performance monitoring Historical performance monitoring Resetting port counters Configure dialog boxConfiguring Vlan Changing the standby Management Module to active Management Module switchoverEnable or Disable MR Switch Over Status dialog box Switch Fabric Module Port mirroring Configuring port mirroringPort mirroring Editing a port in port mirroring Select Configure Port MirroringAdding a port to port mirroring Deleting a port from port mirroring Configuring sFlow in Element ManagerSFlow Web Management interface Accessing the Web Management interfaceSelect Configure Element Manager Web Web Management interface Element Manager Front Panel Web Management interface troubleshootingAccessing the IP device front panel Select Configure Element Manager Front Panel Configuration repository Configuration Repository and Backup Configuration repository 745 Saving the configuration status 747 Comparing product configurations Viewing the configuration 749 Restoring a configuration Searching the configuration repository Exporting a configuration to a text file Change tracking Configuration deviationViewing configuration deviation status 754 53-1003056-01 Configuration Snapshots tab displays, as shown in Figure Configuration snapshots Comparing configuration snapshots Configuration snapshots Generating a configuration snapshot report Viewing the pre- and post-configuration snapshot Click Save Snapshot Saving a configuration snapshot Searching the configuration snaphots Scheduling a configuration backup Schedule backup 763 Edit Automatic Configuration Backup dialog box displays Disabling a backup schedule Configuration requirements IP Configuration Wizard DNS PayloadsPayloads Payload name Description Product Payloads Interface Payloads Creating a payload configurationSelect Configure Configuration Wizard Payload name Description Creating a payload configuration 769 770 53-1003056-01 Save to Flash and Reload Don’t Save to Flash or ReloadSave to Flash Configuration dialog box Deployment Schedule pane 773 Select a configuration from the Product Configurations list Duplicating a payload configurationModifying a payload configuration Duplicating a payload configuration Modifying a payload configuration Deploying a payload configuration Deploying a payload configurationDeleting a payload configuration CLI configuration overview CLI Configuration Management This chapter Viewing existing templates Select Configure CLI ConfigurationViewing existing templates To create a new configuration, complete the following steps Product configuration templatesCreating a new product configuration Product configuration templates 780 53-1003056-01 781 CLI Template dialog box Parameters tab 783 CLI Credentials dialog box Changing product credentials Importing parameter values into a configuration Select a row in the Parameters table Click Preview Previewing CLI commandsPreviewing CLI commands Different values for each target Same value for each target CLI command guidelines CLI command guidelinesCopying a product configuration Editing a product configuration To test a configuration, complete the following steps Testing a configuration Editing the CLI responses properties file Valid and invalid responses from devices Failureresponseend Editing the Network OS CLI responses properties fileSuccessresponsestart Successresponseend Valid and invalid responses from devices Configuration command response validation To delete a configuration, complete the following steps Deleting a configurationUsing a dash character in CLI Configuration manager Configuration error checking Deploying a configuration on demand CLI configuration deployment Creating a monitoring configuration Monitoring configurations 796 53-1003056-01 797 Show interface ethernet $portSLOTPORTSlot#/Port# 799 Copying a monitoring configuration Editing a monitoring configuration Select Reports Product CLI CLI deployment reportsViewing CLI deployment reports Product CLI Report displays CLI configuration schedulingConfiguring a one-time deployment schedule Configuring an hourly deployment schedule CLI configuration scheduling Configuring a daily deployment scheduleConfiguring a weekly deployment schedule Configuring a monthly deployment schedule Configuring a yearly deployment schedule 806 53-1003056-01 Obtaining software files Image Repository for IP Products Products supporting the image import Boot image managementViewing the list of boot images Products supporting the image import Select Configure Firmware Management Manually importing boot images Deleting boot images from the Management application Deploying boot images to products Software image management Software image managementViewing the list of software images Manually importing software images Click OK on the Import Software Image dialog box Automatically retrieving software images from products Deleting software images from the Management application Right-clickConfiguration Schedule BackupSchedule Backup dialog box displays, as shown in Figure Deploying software images to products Unified image management Unified image managementViewing the list of unified images Import Firmware Image from File dialog box displays Importing unified images into the Management application Click OK on the Manual Import Unified Image dialog box Complete the following steps Updating unified imagesDeploying unified images to products Deleting unified images from the Management application Serial firmware update and activation for NOS devices Vlan Manager Default VlanVlan Management Private Vlan Remote Switched Port AnalyzerSuper-aggregated Vlan Transparent LAN Support Configuration requirements for Vlan Manager Vlan Manager tabs Feature VCS FC mode Logical chassis mode Standalone modeDisplaying a list of VLANs Vlan management in a VCS environment Displaying VLANs in the Vlan view 824 53-1003056-01 Displaying VLANs by products 826 53-1003056-01 Adding or modifying port VLANs Port VLANs 828 53-1003056-01 Select Configuration Manager Vlan Manager Adding or modifying dual mode ports Assigning DCB ports to a Vlan L2 mode Tagged mode Adding Vlan properties 832 53-1003056-01 Deleting a port Vlan in Product view Modifying port Vlan propertiesDeleting port VLANs from products Deleting a port Vlan in Vlan view Select a Save Configuration option Spanning Tree Protocol configurationDeploying Vlan configurations Spanning Tree Protocol configuration Configuring STP or Rstp on a port Vlan FOS Vlan Mstp Target context STP typeIOS Vlan STP, Rstp STP, RSTP, Mstp Deploying an STP configuration on a port Vlan Configuring Mstp on a product Adding an Mstp instance Assigning an Mstp instance to a Vlan Vlan routing Vlan routingManaging IP addresses on an SVI Deploy IP Configuration dialog box Vlan routing Click the Deploy now option Select a Save Configurations option Mpls Management Mpls pre-configuration Mpls licensing Mpls Licensed and Configured Products group Mpls overview Configuring LDP LSP Select the Admin Groups tab Figure Viewing LSP Admin Group informationSelect Configure Mpls LSP Select the Paths tab Figure Viewing LSP path information Select the Rsvp LSPs tab Figure Viewing Rsvp LSP information Related topics Mpls overview Viewing saved LSP configurations LSP Adding an LSP admin group Duplicating an LSP admin group Editing an LSP admin group Adding an LSP path Deleting an LSP admin group You can edit an LSP path by taking the following steps Editing an LSP path Deleting an LSP path LSP Delete Path Configuration wizard displays FigureDuplicating an LSP path Configuring advanced Rsvp LSP settings Admin Groups Selector dialog box 858 53-1003056-01 859 860 53-1003056-01 Rsvp LSP Advanced Settings Fast Reroute tab Bypass LSP Deleting an Rsvp LSP Delete Rsvp LSP Configuration wizard displays FigureEditing an Rsvp LSP Duplicating an Rsvp LSP Select the saved configuration Click the Duplicate button Editing a saved LSP configurationDuplicating a saved LSP configuration Select the saved configuration Click the Edit button Select Monitor Mpls LSP Topology Deleting a saved LSP configurationSelect the saved configuration Click the Delete button Displaying LSP Topologies LSP right-click options on the Topology View Mpls Virtual Leased Line VLL overview 868 53-1003056-01 Viewing VLL instances Select Configure Mpls VLLVLL manager Status VLL Mode Tag Mode To view current saved VLL configurations, do the following Viewing Saved VLL configurations To add a new VLL instance do the following Adding or editing a VLL instance Configuring devices using the VLL Manager VLL Configuration wizard Port Configuration dialog box VLL Configuration wizard Deploy Target Actions dialog box Deploying target actions using the VLL Manager VLL configuration wizard Deployment Properties Deploying VLL properties using the VLL Manager VLL configuration wizard Deployment Schedule dialog box Scheduling deployment using the VLL Manager Reviewing the VLL Manager summary Reviewing the VLL Manager configuration To edit a VLL instance, do the following Creating a new VLL instance using duplicateEditing a VLL instance Deleting VLL instances VLL Monitor Dialog box displays Figure Filtering VLL traffic monitoringSelect Monitor Mpls VLL VLL Virtual Private LAN Services Vpls overview 883 Vpls Manager Select Configure Mpls VplsVpls Manager Viewing Vpls instances and peer topologies Endpoint settings PE Devices Vpls settings Vpls Manager Peer Topology tab To view current Vpls configurations, do the following Viewing Saved Vpls configurations Adding or editing a Vpls instance Vpls Configuration wizard Device Configuration dialog box Configuring devices using the Vpls Manager Row is added to the Configured Endpoint Settings list Configuring endpoint settings Deployment Properties page displays Figure Deploying target actions using Vpls Manager Vpls Configuration wizard Deployment Properties dialog box Deploying Vpls properties using Vpls Manager Vpls Configuration wizard Deployment Schedule dialog box Scheduling deployment using Vpls Manager Creating a new Vpls instance from a duplicate Reviewing the Vpls Manager summary To edit a Vpls instance, do the following Editing a Vpls instanceDeleting a Vpls instance Vpls Monitor dialog box displays Figure Filtering for Vpls traffic monitoringSelect Monitor Mpls Vpls Vcid pools Select Configure Mpls Vcid PoolVcid pools Viewing, creating, and deleting Vcid pools Configuring a maintenance association 802.1ag Connectivity Fault Management 802.1ag CFM Add Maintenance Association dialog box displays 900 53-1003056-01 Edit Maintenance Association dialog box displays Editing a maintenance association802.1ag Connectivity Fault Management Click Close on the Configure 802.1ag CFM dialog box 902 53-1003056-01 903 28 802.1ag Connectivity Fault Management Adding a MEP to a maintenance association 905 Editing a MEP 907 Viewing the MEPs in a maintenance association Deleting a maintenance association Checking the connectivity status of remote MEPs Sending a loopback message Click Loopback Sending a linktrace message Click Linktrace Configuring frame delay 915 916 53-1003056-01 Viewing the VIP Servers Select Configure Application Delivery VIP ServersVIP Servers VIP Servers overview Viewing the VIP Servers Viewing VIP Server information Viewing VIP Server information VIP Servers list Disabling servers or server ports Enabling or disabling servers or server portsServer port statistics Enabling servers or server ports Deleting a row from the Server Port Statistics list Gslb Manager Global Server Load Balancing To view the Gslb Manager, perform the following steps Select Configure Application Delivery GslbViewing the Gslb Manager To create a Gslb policy, perform the following steps Gslb policy managementCreating a Gslb policy Gslb policy management 926 53-1003056-01 Applying metrics on the Metrics tab Adding a prefix on the Prefix tab Connection Load Weights Importing IP addresses from a file Deleting a prefix from the Prefix list 930 53-1003056-01 Gslb site management Adding a site configurationGslb site management Adding ServerIron ADX products to the site Managing zones Gslb zone configurationAdding a zone configuration Gslb zone configuration Add Hosts dialog box Adding a host to a zone List of IP Addresses and Weights dialog box displays Editing the list of IP addresses and weightsDeleting a zone configuration Controller Configuration tab displays Controller configurationController configuration Creating a new Gslb controller configuration 939 Deploying a controller configuration Scheduling a deployment One Time Hourly Daily Weekly Monthly Yearly SSL certificates SSL Certificates for ServerIron Products Certificate View tab Figure Product View tab Figure SSL certificate configurationAccessing SSL certificates on the Certificate View tab SSL Certificates dialog box has two tabs 945 SSL Certificates dialog box Product View tab Accessing SSL certificates on the Product View tab Generating a certificate signing request 948 53-1003056-01 949 Related topic Adding an SSL certificate and key file Editing an SSL certificate and key file Viewing SSL certificate details Duplicating an SSL certificate and key file Importing certificates and keys from file locations Importing certificates and keys from products Exporting certificates and keys Deploying certificates and keys Creating key passwords 958 53-1003056-01 Chaining SSL certificates Appending SSL certificates 960 53-1003056-01 Deleting SSL certificates 962 53-1003056-01 Introduction to the Deployment Manager Editing a deployment configurationSelect Configure Task Scheduler Deployment Manager Duplicating a deployment configuration Generating a deployment report Deleting a deployment configurationDeploying a configuration Viewing deployment logs Searching the configuration snapshots Generating a deployment configuration snapshot report 967 968 53-1003056-01 SAN performance overview Performance Data SAN performance overview SAN performance measures SAN performance management requirements Example of default access control list Example of Snmp Example of setting Snmp 974 53-1003056-01 FCIP-MIB YES Snmp GETSnmp SET Select Monitor Performance Real-Time Graph SAN real-time performance dataGenerating a real-time performance graph SAN real-time performance data Open the Real Time Performance Graphs dialog box Filtering real-time performance dataReal Time Performance Graphs dialog box displays Graph display Fcip Snmp Exporting real-time performance dataPerformance statistics counters Protocol HBA, CNA HttpHBA, CNA HCM API FC, GE Type Protocol Source OID value IP performance monitoring and traffic analysis IP configuration requirements IP real-time performance monitoring IP real-time performance monitoringMonitoring real-time performance 984 53-1003056-01 Click Sources from the Real Time Graphs/Tables dialog box Adding products and ports to real-time performanceRemoving products and ports from real-time performance Click Mibs tab in the Available Measures area Adding measures to productsRemoving measures from products Select measures Real Time Graphs/Tables dialog box displays Adding measures to ports Adding collectibles to monitoring Removing measures from ports Removing collectibles from monitoring Configuring the performance graphConfiguring the performance graph display Show data points graph Minutes Hours Day Configuring graph options Graph Options dialog box Historical Graphs/Tables dialog box 993 Spreadsheet .csv Image .png Exporting a graphPrinting a graph Choose Export File Format dialog box displays IP historical performance monitoring Name Collector Basics Editing system collectorsDisplaying historical data collectors IP historical performance monitoring 997 Adding or editing a historical data collector Enabling a historical data collector 999 1000 53-1003056-01 1001 1002 53-1003056-01 1003 1004 53-1003056-01 Duplicating a historical data collector Configuring a MIB walk instanceAdding third-party device MIB objects manually Select Monitor Performance Historical Data Collectors Deleting a historical data collectorAdding, editing, or duplicating a user-defined expression Duplicating system data collectors 1007 Complete the following steps to delete an expression Deleting an expression Select the Data Monitoring tab Viewing Historical Graphs/Tables NetIron Historical Graph display Select the Collection Status Summary tab Mouse functions for graphs To map a MIB name, use the following format MIB data collectorsMapping a MIB object to a unit name MIB data collectors Complete the following steps to create a report IP Custom performance reportsCreating a custom report IP Custom performance reports 1015 Time Settings Sampling Granularity 1017 Click the Identification tab Exporting an Snmp Monitor report Interpreting the Snmp Monitor report IP sFlow configuration IP sFlow configurationConfiguring sFlow Interface Speed Sampling rate IP sFlow configuration Click NextInterface Payload sFlow Settings dialog box displays Product Payload SFlow Destination dialog box displays Click Next Select the Report Definitions tab Creating custom sFlow reports IP sFlow configuration Select the Product & Port tab 1026 53-1003056-01 1027 IP sFlow configuration Select the Layer 3 & 4 tab Add Report Definitions dialog box, User Identification tab Select the User Identification tab Add Report Definitions dialog box, Time Settings tab Select the Result Settings tab Add Report Definitions dialog box, Result Settings tab 1033 Select Monitor Traffic Analysis Custom Reports Scheduling custom sFlow reports 1035 1036 53-1003056-01 Suspending a custom sFlow report schedule Device-level configuration requirementsIP Traffic analyzer monitoring and sFlow reports Select Monitor Traffic Analysis Monitor sFlow 802.1X configuration requirementsDisplaying sFlow monitoring reports IP Traffic analyzer monitoring and sFlow reports Report list Selecting a report Measure list This field shows the date and time the report was requested Save and close the ipconfig.properties fileInterpreting an sFlow traffic report Viewing top MAC talkers Category list, select L3/L4 Reports Viewing top Vlan talkers Viewing all IPv4 Layer 3 or Layer 4 Top Talkers Viewing all Layer 3 and Layer 4 traffic Reports list, select IPV4 Next list, select TCP Viewing IPv4 top TCP talkers TCP Viewing IPv4 top UDP talkers Icmp Viewing IPv4 top Icmp talkersCategory list, select L3 or L4 Reports Viewing IPv6 Top Talkers Viewing IPv4 Others Viewing other Layer 3 or Layer 4 Top Talkers Complete the following steps to change these combinations Enabling and viewing TCP reportsDefining invalid TCP packet combinations RST-SYN RST-FIN RST-PSH RST-URG FIN-SYN Type list, select Invalid TCP Flags Displaying the invalid TCP Flags reportValid TCP flags report Viewing VCS fabric Top Talker reports Viewing BGP paths report Select Monitor Traffic Analysis Traffic Accounting Troubleshooting sFlow reportsIP traffic accounting IP traffic accounting 1055 1056 53-1003056-01 Frame Monitor Frame Monitor Scsi RW Frame typesScsi Frame Monitoring requirements Creating a custom frame monitor Frame Monitor Configuration Status dialog box Assigning a frame monitor to a port Editing a frame monitor Removing a frame monitor from a port Finding frame monitor assignments Removing a frame monitor from a switch 1064 53-1003056-01 Power center overview Power Center Viewing PoE data for products Select Monitor Power CenterData monitoring To view PoE data for a port, complete the following steps Viewing PoE data for ports To filter port details, complete the following steps Filtering port details Viewing attached device properties 1070 53-1003056-01 To view a PoE chart, complete the following steps Viewing PoE charts 1072 53-1003056-01 1073 Refreshing PoE data PoE power on demand PoE power on demandConfiguring automatic data refresh Powering up PoE-capable ports on demand Powering down PoE-capable ports on demand Scheduling an power up deployment Schedule PoE power deployment Schedule PoE power deployment 1079 1080 53-1003056-01 Configuring a yearly deployment schedule Scheduling a power down deployment Updating a power deployment schedule Scheduled Ports ScheduleName dialog box displays Click Show Ports Deleting a power deployment schedule PoE thresholds PoE thresholdsAdding a PoE product threshold PoE Consumption Consumption % PoE Allocation Adding a PoE port threshold Port allocation Port consumption Port consumption % Thresholds dialog box Choose one of the following measures To view PoE thresholds, complete the following steps Viewing PoE thresholds Updating a PoE threshold To update a PoE threshold, complete the following steps Disabling PoE thresholds To enable PoE thresholds, complete the following stepsTo disable PoE thresholds, complete the following steps Enabling PoE thresholds Viewing PoE performance Monitoring real time power performance on productsViewing PoE performance Deleting PoE thresholds 1094 53-1003056-01 1095 Monitoring real time power performance on ports 1097 1098 53-1003056-01 Policy monitor overview Policy Monitor Policy monitor overview Fabric policy monitors Switch and router policy monitors 1102 53-1003056-01 Host policy monitors 1104 53-1003056-01 Frequency Weekly Preconfigured policy monitorsNext Run Next time the policy will run using the format Management policy monitor Viewing policy monitor status Viewing existing policy monitors Select Monitor Policy Monitor Adding a policy monitor 1109 Add Policy Monitor dialog box, Switch/Router Checks tab 1111 Add Policy Monitor dialog box, Hosts Checks tab Policy monitor scheduling Configuring a one-time policy monitor schedule Configuring a monthly policy monitor schedule Configuring an hourly policy monitor scheduleConfiguring a daily policy monitor schedule Configuring a weekly policy monitor schedule Deleting a policy monitor Editing a policy monitor Predefined configuration rules Configuration rulesViewing a predefined configuration rule Add Configuration Rule dialog box displays Figure Viewing configuration rule detailsConfiguration rules Port Profile Interface Rule expressions 1118 53-1003056-01 1119 Click Cancel on the Add Configuration Rule dialog box Adding a configuration rule Click OK on the Add Configuration Rule dialog box Duplicating a configuration rule Click Add Configuration Rule Editing a configuration ruleClick the Switch/Router Checks tab Click OK on the Edit Configuration Rule dialog box Exporting a configuration ruleImporting a configuration rule Deleting a configuration rule Add Configuration Rule dialog box displays Viewing predefined configuration conditionsAdding a configuration condition Add Condition dialog box displays Figure Select Add Condition Selecting a product Duplicating a configuration condition You cannot edit a predefined configuration condition Editing a user-defined configuration condition Predefined conditions Configuration rules Predefined conditions Policy Monitor dialog box displays Click Add Viewing a predefined configuration block Add Block dialog box displays Figure Adding a configuration blockConfiguration rules Add Monitor dialog box displays Select Add Block Select the Switch/Router Checks tab Duplicating a configuration block You cannot edit a predefined configuration block Editing a user-defined configuration block Click Delete Click Yes on the confirmation message Deleting conditions and blocksPredefined blocks Running a policy monitor Viewing a policy monitor report Viewing a policy monitor report 1137 Click Export File Download dialog box displays Click Save Exporting a policy monitor report Click History Viewing historical reports for all policy monitorsViewing historical reports for a policy monitor Policy Monitor dialog box displays Viewing historical reports for a policy monitor Fault management overview Fault Management Event Purging Event notificationRestrictions Supported IP address types 1143 Defining filters Setting up basic event filteringDefining filters Click Advanced Setting up advanced event filtering 1146 53-1003056-01 Snmp traps Snmp Trap Recipients dialog box, shown in , displays Adding a trap recipient to one or more switchesSelect Monitor Snmp Setup Product Trap Recipients Snmp traps Snmp Trap Forwarding dialog box, shown in , displays Removing a trap recipient from one or more switchesSelect Monitor Snmp Setup Trap Forwarding Snmp trap forwarding Adding a trap destination Select the Enable trap forwarding check box Adding a new trap filter 1152 53-1003056-01 Event reception Accept Snmp v1/v2c traps with only these community strings Event Reception dialog box, shown in , displaysDo not accept Snmp v1/v2c traps Accept Snmp v1/v2c traps with any community string Adding an Snmp v3 credential Snmp traps Snmp security and authenticationPrivacy protocol Authentication Result Credential type Importing a new MIB into the Management application Adding an Snmp v1 or v2c community string Trap customization Registering traps Click the Registered button Unregistering a registered trapCustomizing a registered trap definition Select a product group from the Fabric / Products list Reverting the customization of a registered trap to defaultSnmp informs Enabling or disabling Snmp informs Adding a syslog recipient Syslogs To remove a syslog recipient, complete the following steps Removing a syslog recipientSyslogs Syslog Forwarding dialog box, shown in , displays Select Monitor Syslog Configuration Syslog ForwardingSelect the Enable syslog forwarding check box Adding a syslog forwarding destination Adding a syslog filter 1165 Select Monitor Event Processing Event Actions Event action definitionsSnort message forwarding Creating an event action definition Event action definitions Selecting an event for an event action 1168 53-1003056-01 Configuring varbind filters Sources pane of the Add Event Action dialog box Selecting source address products and ports Click Next to advance to the Sources pane Configuring event action policies Editing event actions 1174 53-1003056-01 1175 Acknowledging special events Special events handling 1177 Configuring event action e-mail settings Modifying an event action definition Click Cancel to cancel the operation Deleting an event action definition Configuring event actions for Snort messages Import Snort Rule File dialog box displays, shown in Figure Pseudo eventsClick the Import Snort Rule button Pseudo Events dialog box, shown in , displays Displaying pseudo event definitionsCreating pseudo event definitions Select Monitor Event Processing Pseudo Events Setting pseudo event policies Filtering pseudo event traps 1185 Deleting a pseudo event definition Editing a pseudo event definition Adding a pseudo event on the escalation policy 1188 53-1003056-01 Adding a pseudo event on the resolving policy 1190 53-1003056-01 Adding a pseudo event on the flapping policy 1192 53-1003056-01 Event custom reports Select Reports Event Custom Reports Defining report settingsEvent custom reports Defining the report identity 1196 53-1003056-01 To filter a report definition, complete the following steps Filtering a report definition Add/Edit Report Definition dialog box Filter tab Add/Edit Report Definition dialog box Product tab displays Filtering report events by date and time 1200 53-1003056-01 Editing a report definition Event custom report schedules Event custom report schedulesDeleting a report definition Adding or editing an event report schedule One Time Event logs Event logsViewing event logs Copying part of a log entry Exporting the entire log Copying an entire log entry Displaying event properties from the Master Log Mailing all event details from the Master LogMailing selected event details from the Master Log Event Field Description Event logs Event PropertiesClick Close to close the Event Properties dialog box Select Table Copy Table Copying part of the Master LogCopying the entire Master Log Exporting the Master Log Filtering events in the Master Log ‘unnamed’ filter Deleting a Filter ‘none’ filterEditing a Filter Duplicating a Filter Packet Capture Pcap Configuring packet capturesSelect Configure Packet Capture Pcap Configure Pcap dialog box, shown in , displays 1214 53-1003056-01 Capturing Server and Client support save data Technical SupportServer and client support save Capturing Server support save data Capturing Client support save data Server and client support save Client support save using a command line interface Click the Schedule tab Device technical supportScheduling technical support information collection Device technical support Select the Enable scheduled Technical Support Data check box 1221 Click OK on the Technical SupportSave dialog box Starting immediate technical support information collection Click the Generate Now tab, if necessary Progress Click Close on the Technical SupportSave Status dialog boxField Description Firmware Type Viewing the technical support repository Type Default location Default naming convention Mail button Saving technical support information to another locationClick OK on the Technical Support Repository dialog box Available SupportSave Mailing technical support information Select the file you want to delete in the table Click Delete Deleting technical support files from the repository 1229 1230 53-1003056-01 Browser requirements ReportsReports overview Viewing IP reports Select E-mail as Html Select E-mail as CSV Exporting and saving IP reports to a fileExporting IP reports to e-mail recipients Select Export as Html Select Export as CSV IP Wired Products report IP report contents IP Wired Products report Stacking Units Detailed Product ReportExport button IP Addresses Stacking PortRealtime Modules Controller Cluster Cluster Peer MCTPhysical Ports GRE Tunnels AP List Count Detailed Cluster Report Nodes System InformationSystem Name values Physical Media IP Module reportFC Ports Field/ComponentDescription IP Port VLANs reportIP Layer 3 Vlan report IP Subnet report Layer 3 Vlan report fields and components IP Subnet report Port Name IP Address reportMAC Address report IP Address report IP Physical Ports Realtime report IP Physical Ports Realtime reportIP Stacking Ports Realtime report IP Physical Media Realtime report IP Physical Media Realtime report Select Reports Deployment IP Deployment reportsViewing a deployment report IP Deployment reports Reports Template Manager overview Preconfigured reportsReports Template Manager overview User-defined reports Report Template Manager dialog box displays Figure Accessing the Report Template ManagerSelect Reports Report Manager Viewing a report Deleting reports Importing a report templateExporting a report template Report content and functions Product Count Products List report IP address of the product Displayed for products that support stacking Physical port information for each port on the product Product Report Cluster Ports Tx/Rx Ratio report Total Received MB Summary table LocationDevice Name Detailed Product Report Max Rx Utilization % Low Traffic Ports reportMax Tx Utilization % Exporting data from the report Dashboard main menus Menu Command Command OptionsApplication menus This appendix Edit Menu Command Command OptionsIP main menus IP main menus Discover Menu Element Manager. Select to configure a selected device Configure Menu Lsan Zoning Device Sharing. Trial and Licensed version Monitor Menu Reports Menu Tools Menu IP shortcut menusIP shortcut menus Launches the Real-Time Graphs / Tables dialog box Component Menu/Submenu Commands CommentsIP shortcut menus IP Subnet IronWare device L2 ACL DCB VCS/VDX Third-party device 1273 1274 53-1003056-01 Event reason code FRU code/Event type Description Severity Call Home Event TablesIP Call Home Event Network OS Call Home Event Call Home Event Tables Network OS Call Home Event Product status events Event Categories Product audit events Security events Security eventsSecurity events for FC devices Security events for IP devices Management server events User action events Trap name Product eventsIP Performance monitoring events Product events IP Performance monitoring events About user privileges User Privileges Privilege Description No Privilege Read-Only Read/Write About user privileges Application privileges and behavior Event Notification Setup button in the Users dialog box Setup Mail server used to Send e-mail Disables Event Syslog Registration Options commandRegistration Forwarding dialog box Monitor menu Event Storage option Performance Graphs dialog box and enables all controls Management commandEnables the Security L2 Update and OK Policy monitors Command on the Monitor Menu Disables Policy Monitor Enables Policy Monitor Server Options menu Configure Switch Replicate menuLogs menu Monitor Technical SupportSave, Upload Repository command Upload Failure DataView Repository Technical Support menu Repository commands Capture, and View 1291 Compare and Export Cancel and Help buttonsZoning Compare/Merge dialog Compare/Merge dialog Zone Config tab Switch, Activate Zoning Scope list does Edit Limits commandLsan Zoning Device IP CLI About user privileges IP privileges and behavior Filter IP L3 ACL Profile tab IP Mpls VLLIP Mpls Vpls IP MPLS- LSP Application Features and Role Access Levels About Roles and Access LevelsAbout Roles and Access Levels IP privileges and behavior 1299 IP Mpls LSP Viewing Fabric properties Device PropertiesViewing SAN device properties Click OK on the FabricName Properties dialog box to close Viewing SAN device propertiesViewing SAN device properties Fabric properties Viewing SAN device properties Device properties Remote Switch WWN Preshared key configuredRemote Switch Name Remote Switch IP Select Edit Properties Viewing Storage propertiesICL Viewing SAN device properties Viewing iSCSI Properties dialog box ISNS Service Command Descriptor Block CountDigest Error Count ISCSI Service Viewing port properties Active FC4 Types Class of ServiceAdditional Port Info Address Viewing SAN device properties Port properties Locked Port Type Long Distance SettingISCSI button ISCSI Capable Port State Symbolic NameTroubleshooting list Port Speed Gb/s User Port # IP device propertiesViewing IP device and port properties IP device properties Port properties Alias VCS ModeConfig Mode Detailed Report button IP device properties Show list Profile ModeAccess Points tab Port Profiles tab Device MAC Connected switch \ PortTransceiver Temperature Chassis-Power Supply section of Detailed Report Viewing VCS fabric properties Fabric Status Licensed FeaturesAccess Gateway Mode Nodes tab Associated MACs list MAC CountVLANs Domain Count Native VLAN/VLAN IP device properties 1324 53-1003056-01 FC Ports properties Identifier The identifier of the port SFP/Port Optics Host propertiesHost properties Field Description Viewing adapter port properties Host properties Adapter port properties Click OK to close Properties customizationAdding a property field Properties customization Adapter port properties Deleting a property field Editing a property field Editing a property field directly Properties customization Construct Matches Regular ExpressionsCharacters Posix character classes US-ASCII only Regular Expressions CharactersCharacter classes Predefined character classes Boundary matches Regular Expressions Posix character classes US-ASCII onlyJava.lang.Character classes simple java character type Classes for Unicode blocks and categories Logical operators Regular Expressions Greedy quantifiersReluctant quantifiers Possessive quantifiers Special constructs non-capturing Regular Expressions Back references Regular Expressions CLI Templates CLI Templates HyperEdge Stack Port Deletion HyperEdge Stack EnableHyperEdge Stack Disable HyperEdge Stack Port Creation HyperEdge Peri Port Creation IronWare OS Enable Web Element ManagerIronWare OS Configure L3-Access-List CLI Templates HyperEdge Stack Trunk Deletion MCT Cluster Undeployment CLI Templates IronWare OS Configure L2-Access-ListMCT Cluster Creation MCT Cluster Deployment MCT Client Creation Mpls Loopback Interface ConfigurationMpls Core Interface Configuration CLI Templates MCT Cluster Deletion Ampp CLI Templates Mpls Endpoint ConfigurationNetwork OS Configure CRC Align Errors Monitor Network OS Associate MAC to Port Profile Network OS Configure Inter Frame Gap Violation Monitor CLI Templates Network OS Configure Extended L2 Access ListNetwork OS Configure Inter Frame Gap Violation Fencing Network OS Create CoS Mutation Map Network OS Configure RX Symbol Errors MonitorNetwork OS Configure Standard L2 Access List Network OS Create Vlan Classifier Group CLI Templates Network OS Create Lldp ProfileNetwork OS Create Port Profile Network OS Create Traffic Class Map CLI Templates Network OS Create Vlan Classifier Rule Network OS Update ACL on Port ProfileNetwork OS Update QoS on Port Profile Network OS Update Vlan on Port Profile Private Vlan Add native Vlan mode to Pvlan trunk CLI Templates Private Vlan Configure Vlan as a PvlanPrivate Vlan Delete Pvlan configuration from Vlan Private Vlan Configure Pvaln mode in L2 interface $PRIMARYVLANIDINTEGER $SECONDARYVLANIDINTEGER Private Vlan Delete Pvlan mapping from promiscuous portPrivate Vlan Delete Pvlan associations from host port Private Vlan Delete Pvaln associations from trunk port VRF Delete Route Targets Export and/or Import Configuration VRF Route Distinguisher ConfigurationVRF Maximum routes configuration for IPV4 Address Family VRF Route Targets Export and/or Import Configuration IronWare OS Vlan Remove interfaces from Vlan as untagged IronWare OS Vlan Configure virtual routing interfaceIronWare OS Vlan Enable Spanning Tree Protocol on IOS Vlan CLI Templates VRF Display VRF Information Network OS Vlan Vlan Interface Deletion Network OS Vlan Layer2 Switch Port ConfigurationNetwork OS Vlan Native Vlan Configuration Network OS Vlan Vlan Interface Creation Network OS Vlan Enable Spanning Tree Protocol on NOS Vlan Network OS Vlan Access Interface ConfigurationNetwork OS Vlan Disable Access Interface Configuration 1356 53-1003056-01 Troubleshooting Browser troubleshooting Application Configuration Wizard troubleshooting Client browser troubleshooting Client browser troubleshootingConfiguration backup and restore troubleshooting Element Manager troubleshooting Firmware download troubleshooting Firmware download troubleshooting Sw0FID128admin sshutil delknownhost Select Start Settings Control Panel Java Launch Client troubleshootingLaunch Client troubleshooting Unix operating systems Master Log and Switch Console troubleshootingMaster Log and Switch Console troubleshooting Select Discover IP Products Patch troubleshootingPatch troubleshooting Click the Global Settings tab Professional edition login troubleshooting Professional edition login troubleshootingServer troubleshooting Management console errors Server Management Console troubleshootingServer Management Console troubleshooting Select Properties Supportsave troubleshootingSupportsave troubleshooting Problem Master log warning message Technical support data collection troubleshootingWireless troubleshooting Technical support data collection troubleshooting Zoning troubleshooting Wireless troubleshooting Zoning troubleshooting Zoning troubleshooting Achcallcenter AchcallcenterconfigDatabase Fields Database tables and fields Achinfo Database tables and fields AcheventAcheventfiltermap Achfilter Aordevicegroupmap AdapterportconfigdetailsAdapterportconfigproperty Adapterdriverfiledetails Aorinmportgroupmap AordevicemapAorfabricmap Aorhostmap Birtreportruntemplate AvailableflyoverpropertyBirtreportparameter Database tables and fields Birtreportruntemplate BirtreportscheduleconfigBootimagedrivermap Bootimagefiledetails Capability Database tables and fields BootimagefiledetailsBootlunsequence Bootlunsequencedetail Database tables and fields Card Ceduserpreference CardcapabilityCedapplication Cedapplicationmember Ceeport Cfgbackuparchive Clitemplate Database tables and fields CfgbackuparchiveChangelog Clientview Database tables and fields Clitemplate Cluster ClientviewcolumnClientviewmember Clientviewmemberhost Cnaproductconnectivity CnaethportconfigCnaethport Collector Database tables and fields CnaethportconfigCnaport Collectortargetentry ConfigblockCollectormibobjectentry Collectorsnmpexpressionentry Coreswitch Configcondition Database tables and fields Coreswitch Coreswitchdetails CoreswitchcapabilityCoreswitchchecksum Coreswitchcollection Database tables and fields Coreswitchdetails Cryptohost Cryptolun Database tables and fields Cryptolun Cryptoswitch Cryptotargetcontainer Database tables and fields Cryptoswitch Dashboard Database tables and fields CryptotargetcontainerCustomfavoritesobjectlist Dashboardprovider Database tables and fields DashboardDashboardcanvas Dashboardcanvaspreference Dashboardwidget Dashboardwidgetpreference DefaultfavoritesDatabase tables and fields Dashboardwidget Deploymentconfiguration Database tables and fields DefaultfavoritesDefaultwidgetpreference Deploymentproductstatus Database tables and fields DeploymentconfigurationDeploymenthandler Deploymentstatus Database tables and fields DeploymentproductstatusDeploymentreporttemplate Device Deploymenttargetmap Database tables and fields Device Tacpluspasswordreadonl TacpasswordportcfgTacpasswordreadonly Tacpluspasswordportcfg Mplsmanagestate LicensedfeaturesTrapregistered Portcount =SSH =HTTPS =WINGHTTPS Poecapable IsdcbswitchProductfamily Netconftransport Vcslicensed IsprincipalswitchWirelesstype Vcsid Deviceenclosure Deviceconnection Database tables and fields Deviceenclosure Devicefdmidetails Deviceenclosuremember Devicegroupentry Database tables and fields DevicefdmidetailsDevicegroup Devicenode Database tables and fields DevicegroupDevicemacgroupmapping Deviceport Database tables and fields Devicenode Deviceportmacaddressmap Deviceportgigeportlink Encryptionengine Diskusage Encryptiongroup Database tables and fields Encryptionengine Database tables and fields Encryptiongroup Encryptionkmipparameters Encryptiongroupmember Ethernetisl EncryptiontapepoolEthernetcloud Database tables and fields Ethernetisl Event Eventdescription Database tables and fields EventEventcallhome Eventcategory Eventfwdfilter Eventdetails Eventmodule Database tables and fields EventfwdfilterEventinstance Eventpolicy EventnotificationEventorigin Eventpolicysourceentry Database tables and fields Eventpolicy Eventprocessormap EventruleDatabase tables and fields Eventpolicysourceentry Eventruleaction FabricDatabase tables and fields Eventrule Database tables and fields Fabric Fabriccollection Fabricchecksum Fabricmember Database tables and fields FabriccollectionFabricdiscoverypolicy Fabricdiscoverypolicyrule Fabricvcsclustermap FabricthresholdsettingFavorites Database tables and fields Fabricmember Fcipporttunnelmap Database tables and fields FavoritesFcipcircuitportmap Fciptunnel Database tables and fields Fciptunnel Fciptunnelcircuit Database tables and fields Fciptunnelcircuit Circuitstatusstring MismatchedconfigurationsSecurityflag Circuitstatus Fciptunnelperformance Fcoedevice FeatureFeatureeditionmap Featuresusage Firmwarefiledetail Database tables and fields FeaturesusageFicondeviceport Foundrymodule FirmwareswitchdetailFoundrydevice Fporttrunkgroup Database tables and fields FoundrymoduleFoundryphysicaldevice Foundryphysicalport FRU Generatedreport FtpserverDatabase tables and fields FRU Database tables and fields Generatedreport Gigeport Gretunnelinterface GigeportethernetcloudlinkGigeportstats Globalvlan HBA Hacluster Database tables and fields HBA Hbanodemap Hbaport Supportedcos SwitchipOperatingtopology SUPPORTEDFC4TYPES Hbaportdetail Database tables and fields Hbaportdetail Hbaportfcoedetails Hbaportdeviceportmap Database tables and fields Hbaportfcoedetails Hbaremoteport Hbaremoteportlun Database tables and fields Hbaremoteport Hostdiscoveryoption HbatargetHealthstatus Healthtargetstatus Hostdiscoveryrequest Database tables and fields HostdiscoveryoptionHostdiscoveryreqgroup Hypervvirtualmachine Database tables and fields Hostdiscoveryrequest Interface HypervvmhbaportmapIFL Ipdevicelicense InterfacedeploymentconfigDatabase tables and fields Interface Ipportgroup Database tables and fields IpdevicelicenseIpinterface ISL IprouteIpsubnetvlan Ipxnetworkvlan Islconnection SourceswitchportidTargetswitchportid Database tables and fields ISL Targetmasterport IsltrunkgroupMasterconnectionid Sourcemasterport Keyvault L2ACCESSCONTROLENTRYIsltrunkmember L2ACLINTERFACEDEPLOYMAP Database tables and fields L2ACCESSCONTROLENTRYL2ACCESSCONTROLLIST L2ACLDEVICEDEPLOYMAP L3ACLINTDEPLOYMENTMAP Database tables and fields L2ACLINTERFACEDEPLOYMAPL2NEIGHBOR L3ACLDEVICEDEPLOYMENTMAP Lagmember LAGDatabase tables and fields L3ACLINTDEPLOYMENTMAP Launchincontextmodule LastconfigupdatetimeDatabase tables and fields Lagmember Licensedowngradedetails LicenseDatabase tables and fields Launchincontextmodule Licenserule LicensefeaturemapLicensedfeature Database tables and fields Licensedowngradedetails Lsanproxydevice LsantagconfigLock Lsandevice Mctclient LsanzonedbconfigLsanzone Lsanzonemember Macgroup Database tables and fields MacfilterMacfilterdevdeploymentmap Macfilterintdeploymentmap Managedelement MacgroupMapsevent Macgroupmember Mapseventcauseaction Database tables and fields MapseventMapseventdetails Measure MapspolicyMarchingants Migrationhistory ModuleMessagerecipient Database tables and fields Module Moduleslotpresent MplsadmingroupMplsadmingroupinterfacerelation Mplslsp Mplsrsvplsp MplspathMplspathhop Mplsrsvplspactuallyroutedhop MplsrsvplspadmingroupMplsrsvplspadmingroupcontainer Database tables and fields Mplsrsvplsp Mplsrsvplspparameters Mplsrsvplspfrrparameters Mplsrsvplsptunnelresource MplsserviceDatabase tables and fields Mplsrsvplspparameters Mplsrsvplsppath Mplsserviceendpointrelation Database tables and fields MplsserviceMplsservicedevicerelation Mrpringdevice Database tables and fields MplsserviceendpointrelationMplsservicepeerrelation Mrpring Database tables and fields Mrpringdevice Nicprofile N2FPORTMAPNetworkvlan Networkscopetype Npflowdefinition Database tables and fields Nportwwnmap Ouiguesseddevicemap Database tables and fields NpflowdefinitionNpsubflow Perfcollector PasswordhistoryPbrinterfaceconfig Ouivendor Pbrruleacllist PbrpolicyPbrrule Pbrnexthop Physicaldevice Database tables and fields PbrruleacllistPhantomport Physicalinterface Database tables and fields Physicaldevice Physicalport PmcollectormeasuresettingPmcollectortargetsetting Database tables and fields Physicalinterface Pmdashboardwidget Database tables and fields PmcollectortargetsettingPmcollectortimeseriesmapping Pmdatacollector Database tables and fields Pmdashboardwidget Pmstatsagingpolicy PmmeasureDatabase tables and fields Pmdatacollector Pmwidgettargetentry PmwidgetmeasuretypePmwidgetmeasuretypeentry Pmwidgetmonitortype Poethreshold Database tables and fields PmwidgettimeseriesentryPmwidgettopncollectorentry Pmwidgetuserentry Policyrulemap Database tables and fields PoethresholdPoethresholdevent Policyrule Portcommissioncimomserver PortbottleneckconfigPortbottleneckstatus Portfencingpolicymap Database tables and fields PortcommissioncimomserverPortfencingpolicy Portprofiledomain Database tables and fields PortfencingpolicymapPortprofile Portprofileqosmap PortprofiledomainmapPortprofileinterfacemap Portprofilemacmap Portprofilevlanmap Portprofileqospfcmap Portvlan Productapp PrivilegeDatabase tables and fields Portvlan Qrtzcrontriggers ProtocolvlanQrtzblobtriggers Qrtzcalendars Qrtzpausedtriggergrps QrtzlocksQrtzjobdetails Qrtzjoblisteners Qrtztriggers Database tables and fields QrtzschedulerstateQrtzsimpletriggers Qrtzjtriggerlisteners Quorumcardgroupmapping RecoverycardgroupmappingRaslog Querybaseddevicegroup Resourcefabricmap ReporttypeReporttemplate Reportdrilldowntemplate Ruleblockmap RoleResourcehostmap Roleprivilegemap Sanconnection SANRulelogicalexpressionmap Securitypolicy ScomhostDatabase tables and fields Sanconnection Currentreading SensorSelectedflyoverproperty Sensorid Sflowhoursummary Sflowcheckpoint L3SRCADDR InpriorityOutpriority Srcmac Sflowminutebgp Sflowiprouteinfo Sflowminutemac Database tables and fields SflowminutebgpSflowminutebgpslnum SFLOWMINUTEL3SLNUM Sflowminutevlan Database tables and fields SflowminutemacSflowminutemacslnum Sflowminutesummary SFLOWREPORTL4SOURCE Database tables and fields SflowminutevlanSflowminutevlanslnum SFLOWREPORTL3SOURCE Database tables and fields Sflowstaging Sflowstagingslnum Smartcard Snmpcredentials Database tables and fields SmartcardSmiasanname Snapshotproductstatus Database tables and fields Snmpcredentials Snmpdata Mibindex Database tables and fields SnmpdataSNMPDATA1DAY SNMPDATA2HOUR SNMPEXPRDATA1DAY SNMPDATA30MINSnmpexprdata Snmpprofile Database tables and fields SNMPEXPRDATA1DAYSNMPEXPRDATA30MIN Snmpexpression Writecommunitystring Database tables and fields SnmpprofileReadcommunitystring Sslcertificate SnmptrapcredentialSNMPV3FORWARDINGCREDENTIAL Sourceobjecttype Sslcertificatevipservermap SslkeyDatabase tables and fields Sslcertificate Stpport SslkeypasswordDatabase tables and fields Sslkey Statsaging Stpport Stpinstance Switchbottleneckconfig Database tables and fields Stpinstance Field SwitchconfigSwitchconfigdetail Switchlicense Switchport Switchmodel Database tables and fields Switchport Qosenabled NpivenabledFcfastwriteenabled Islrrdyenabled Logicalportwwn DefaultareaidEportdisabled Logicalportnumber Switchportperformance Database tables and fields Switchportperformance Targettype SwitchthresholdsettingSystemcardenginemapping Systemproperty TIMESERIESDATA1DAY ThresholdmeasureThresholdpolicy Timeseriesdata TABLE\399 TIMESERIESDATA30MIN Database tables and fields TIMESERIESDATA1DAYTIMESERIESDATA2HOUR Sumvalue TIMESERIESDATA1TIMESERIESDATA11DAY Minvalue Database tables and fields TIMESERIESDATA11DAYTIMESERIESDATA12HOUR TIMESERIESDATA130MIN TIMESERIESDATA2 Database tables and fields TIMESERIESDATA130MIN TIMESERIESDATA22HOUR TIMESERIESDATA21DAY TIMESERIESDATA3 Database tables and fields TIMESERIESDATA22HOURTIMESERIESDATA230MIN TIMESERIESDATA32HOUR Database tables and fields TIMESERIESDATA3TIMESERIESDATA31DAY TIMESERIESDATA330MIN Database tables and fields TIMESERIESDATA32HOUR TIMESERIESDATA41DAY TIMESERIESDATA4 TIMESERIESDATA430MIN TIMESERIESDATA42HOUR Database tables and fields TIMESERIESDATA430MIN ToolappToolpath Trill Trunkgroupinterface TrilltrunkgroupTrilltrunkmember Trunkgroupmember User Userdefinednetworkscope Database tables and fields UserUseraormap Userdefineddevicedetail Userrealtimemeasuremapping UserrealtimemeasuresettingContent Userpreference Vportdetail UserresourcemapUserrolemap Userstatemap Vcnpeer Vcnmember Vcemprofile VcnpeerVcsclustermember Virtualcircuitinterface Database tables and fields VcemprofileVipserver Vipserverbinding Virtualfcoeportstat VirtualfcoeportVirtualfcoeportmacmember Virtualportwwndetails Database tables and fields Virtualfcoeportstat Database tables and fields Virtualportwwndetails Virtualswitch Database tables and fields Virtualswitch Domainidoffset FcoeloginenabledInsistentdidmode DOMAINMODE239 Monitored HifenabledMapsenabledactions CLUSTER1 Vcsid Vlan Vlanintmacgrouprelation VlaninterfacememberVlaninterfacerelation Vlanintctagrelation Vmotionevent Vllendpointrelation Vmdatastoredetails Database tables and fields VmotioneventVmotionpnicdetails Vmdatacenter Vmdvport Vmdvportgroup Database tables and fields Vmdvport Database tables and fields Vmdvportgroup Vmdvswitch Vmfchba Database tables and fields VmdvswitchVmdvswitchhostmember Vmfchbadeviceportmap VmhostDatabase tables and fields Vmfchba Vmhostenddevconnectivity VmhostproxyswitchDatabase tables and fields Vmhost Vmhostvirtualnic Database tables and fields VmhostproxyswitchVmhostproxyswitchpnicspec Vmnicteamingpolicy VmnetworksettingsDatabase tables and fields Vmhostvirtualnic Database tables and fields Vmnicteamingpolicy Vmpath Vmphysicalnic Vmsecuritypolicy Database tables and fields Vmphysicalnic Vmstdvswitchportgroup VmstandardvirtualswitchVmstandardvswitchport Vmstorage Database tables and fields Vmstdvswitchportgroup Vmtrafficshapingpolicy VmvcenterVmstoragehbaremoteportmap Vmvirtualethernetadapter Database tables and fields VmvcenterVmvcentermember Database tables and fields Vmvirtualethernetadapter Vmvirtualmachine Vplsendpointrelation Database tables and fields VmvirtualmachineVmvirtualmachinedatastoremap Vplsdevicerelation Vrconnfcconnection VrconndomainVrconndomaingroup Vrconnmoduleport Vrconnmodule Vrconnwwn WirelessproductdetailsVrconnserverprofile Zone WirelessproductrelationWtarchive Zonedb ZonealiasZonealiasinzone Zonealiasmember ZONEIN-ZONESET ZonedbconfigZonedbcontent Zonedbusers Views AdapterportconfiginfoViews Agconnectioninfo Cnaportdetailsinfo BootimagefiledetailsinfoCnaethportconfiginfo CNAETHPORT.HARDWAREPATH, CNAETHPORT.STATUS CNAETHPORT.MTU CNAPORT.ALARMWARNINGCnaportinfo CORESWITCH.ID Coreswitchdetailsinfo Cryptolun LUN, Cryptohost CORESWITCHDETAILS.DESCRIPTIONCoreswitch Left Outer Join Coreswitchdetails Cryptohostluninfo DASHBOARD.CREATEDBY CRYPTOTARGETCONTAINER, ENCRYPTIONENGINE, CryptoswitchCryptotargetengineinfo Dashboardpreferencesinfo Deploymentlog DeploymentconfigurationDeploymentinfo Deviceconnectioninfo EEMONITORSTATS1DAYINFO EEMONITORSTATS5MININFOEEMONITORSTATS30MININFO EEMONITORSTATS2HOURINFO TEPORTSTATS30MININFO TEPORTSTATS5MININFO TEPORTSTATS1DAYINFO TEPORTSTATS2HOURINFO CORESWITCH.MAXVIRTUALSWITCHES SwitchinfoCORESWITCH.IPADDRESS Deviceinfo CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, FabricVIRTUALSWITCH.CORESWITCHID = CORESWITCH.ID DEVICEPORT.IPPORT DEVICEPORT.HARDWAREADDRESS DEVICENODE.SIMULATEDDEVICEPORT.NUMBER DEVICEPORT.PORTID Devicenodeinfo DEVICENODE.FABRICID = SWITCHINFO.FABRICIDN2FPORTMAP Switchport Agnport Switchport Agfport N2FPORTMAPINFO Devicenode Deviceportinfo DEVICEPORTGIGEPORTLINK.DIRECTATTACH DevportgigeportlinkinfoDEVICENODE.FDMIHOSTNAME Deviceport Islinfo DevportmacaddrmapinfoIslconnectioninfo ISL.DESTPORTNUMBER FABRIC.ID = ISL.FABRICID DESTSWITCHPORT.VIRTUALSWITCHID = DESTVIRTUALSWITCH.IDEthernetislinfo Eventdetailsinfo Eventinfo Fabricinfo FCIPTUNNELCIRCUIT.DSCPDATA FciptunnelcircuitinfoFABRICMEMBER.FABRICID = FABRIC.ID FCIPTUNNEL.DSCPCONTROL FciptunnelinfoFciptunnelcircuit Fruinfo Fcoedeviceinfo Gigeportecloudlinkinfo Hbaportdetailsinfo Gigeport Switchport CoreswitchHBAPORT.DEVICEPORTID HBAPORT.CONFIGUREDSTATE Gigeportinfo HBAPORT.SUPPORTEDFC4TYPES HBAPORT.SUPPORTEDCOS HBAPORTDETAIL.PREBOOTDISABLED HBATARGET.TRUSTED HbatargetinfoHbaport HBATARGET.DEVICEPORTID HBAREMOTEPORT.IOLATENCYAVERAGE HealthstatusinfoHBAREMOTEPORT.VENDOR HBAREMOTEPORT.PRODUCTID HBAREMOTEPORT.CURRENTSPEED DEVICEENCLOSURE.TYPE HostdiscoveryrequestinfoHOSTDISCOVERYREQUEST.ID HOSTDISCOVERYOPTION.VMPORT HOSTDISCOVERYREQUEST.DEVICEENCLOSUREID = DEVICEENCLOSURE.ID IflinfoHostdiscoveryrequest Isltrillinfo ISL Device Vcsdevice IsltrunkgroupmemberinfoISL.DESTDOMAINID ISL.DESTPORTNUMBER DESTDEVICE.MANAGEDELEMENTID AS Destmeid Isltrunkinfo L2NEIGHBOR ISLINFO.SOURCESWITCHID = ISLTRUNKGROUP.VIRTUALSWITCHIDL2NEIGHBORINFO Mapseventdetailsinfo TEMPMODULE.MODULEID TEMPMODULE.NUMPORTS Moduleinfo FOUNDRYMODULE.MODULEID FOUNDRYMODULE.SERIALNUM NportwwnmapinfoMODULE.MODULEID MODULE.NUMPORTS MODULE.ISPRESENT PHYSICALDEVICE.DEVICEID Productinfo Phantomportinfo Lastseentimestamp TEMPDEVICE.FABRICWATCHSTATUSTEMPDEVICE.RBRIDGEID TEMPDEVICE.IPADDRESS TEMPDEVICE.ISROUTER, TEMPDEVICE.ISSLB TOTIMESTAMPTEMPDEVICE.FIRSTSEENTIME,YYYYMMDDHH24MISS as TEMPDEVICE.FIRSTSEENTIME Portgroupinfo PortbottleneckconfinfoPortbottleneckstatinfo Portprofileinfo Roleprivilegeinfo Portprofile PortprofileinterfaceinfoPortprofilemacinfo PORTPROFILE.ACTIVATED PORTPROFILEQOSMAP.DCBMODE Sflow PortvlaninfoProtocolvlaninfo Scomeemonitorinfo SFLOWMINUTEL3VIEWSflowminutemacview SOURCEPORT.ID = EEMONITOR.SOURCEPORTID SensorinfoEemonitor Smartcardusageinfo SWITCHCONFIG.ID= SWITCHCONFIGDETAIL.SWITCHCONFIGID SwitchconfiginfoSwitchdetailsinfo SWITCHCONFIG, Switchconfigdetail VIRTUALSWITCH.FMSMODE CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, Coreswitchdetails VIRTUALSWITCH.MANAGEDELEMENTID DEVICE.IPADDRESS, DEVICE.DEVICEID SwitchdiscoveredmacinfoSwitchportinfo SWITCHPORT.ID CORESWITCH.TYPE as Switchtype Switchsnmpinfo Timeseriesdatainfo TIMESERIESDATA12HOUR.MEASUREID Timeseriesdataview Union ALL From timeseriesdatainfo tsd Trillinfo Virtualfcoeportinfo TrilltrunkinfoUserroleresourceinfo Virtualportwwndetails CORESWITCHDETAILS.CORESWITCHID = CORESWITCH.IDVIRTUALPORTWWNDETAILS.SWITCHID Virtualportwwndetailsinfo VLANINTERFACERELATION.VLANDBID = PORTVLAN.VLANDBID VmaddressinfoVlanintclassifierinfo DEVICE.DEVICEID INTERFACE.DEVICEID = DEVICE.DEVICEID VmconnectivityinfoMACGROUP.ID DEVICEMACGROUPMAPPING.MACGROUPDBID = MACGROUP.ID DEVICEENCLOSURE.ID AS Hostdbid VMPATH.HBAPORT = DEVICEPORT.WWN Vmnetworkconnectivityinfo DEVICE.MANAGEDELEMENTID VMSTDVSWITCHPORTGROUP.VMSTANDARDVIRTUALSWITCHIDPnicmac VMHOSTENDDEVCONNECTIVITY.INTERFACEID VMHOST.DEVICEENCLOSUREID Switchname VMPATH.HBAPORTBPCHAR = SOURCEPORT.WWN VmdatastoredetailsinfoVmeemonitorinfo Vmpath Vmvirtualmachine Vmluninfo Vmhostinfo Vmstatisticsinfo VMPATH.HBAPORTBPCHAR = DEVICEPORT.WWN SWITCHPORT.PORTID SWITCHPORT.PORTNUMBERSWITCHTEPORTSTATS.TRANSMITOK SWITCHTEPORTSTATS.RECEIVEOK VCEMPROFILE.DISCOVERYSTATUS VrconnmoduleinfoVRCONNMODULE.ID VRCONNMODULE.VRCONNDOMAINID VRCONNDOMAIN.FIRMWAREVERSION Union Select distinct VRCONNMODULE.ID Vrconnnpivinfo Vrconnmoduleportinfo USERDEFINEDDEVICEDETAIL.WWN = VRCONNWWN.PORTADDRESS VmmdiscoveredmacinfoDEVICENODE.FABRICID USERDEFINEDDEVICEDETAIL.NAME Vmvirtualethernetadapterinfo Events ZONEDB.ID = ZONEDBCONFIG.ZONEDBIDZonedbinfo Apusage Physicaldeviceinfo SflowminutebgpviewSflowminutevlanview Snmpdatainfo SlotinfoManagedelementinfo Snmpdataview Snmpexprdatainfo Where sw.id = sp.virtualswitchid = de.managedelementid Device PHYSICALINTERFACE, Physicalport Vmvnetworkinfo Vcsclustermemberinfo Trilltrunkgroup Resetvcslicensed$BODY$ Select Wirelessinterface Wiredinterface CEEPORT.AMPPPROFILEMODE CeeportinfoL3.SUBNETMASK Deviceipaddress CEEPORT.GIGEPORTID = GIGEPORT.ID 1688 53-1003056-01 Ampp Access levels definedIndex CNA EMC, 354 HP LAN, 355 IBM Hosts, 101 CUP, Ficon 1692 53-1003056-01 Gslb FiconFTP State, 102 Mstp Monitor Rbac New device, adding nameNOS Columns, 284 product overview, 453 products 1043 SVI 1699 WWN Edit, 880 1701