Brocade Communications Systems IP250 user manual Editing a Vpls instance, Deleting a Vpls instance

VPLS Manager 28

4.The next available VCID in the VCID pool is automatically placed in the VCID field. You can change the VCID if desired as long as it is not used in a current VLL instance.

5.Modify any of the remaining values in the instance by following the procedure presented in “Adding or editing a VPLS instance” on page 888.

NOTE

The device folder under Available Endpoints lists all MPLS capable devices, whether or not they are in the All MPLS Licensed and Configured Devices group. If they are not and if adding the device endpoints in the VPLS configuration would exceed the license limit, then you will not be able to deploy the configurations.

Editing a VPLS instance

To edit a VPLS instance, do the following:

1.Select Configure > MPLS > VPLS.

2.Select either the Views tab or the Saved Configurations tab.

3.Select the instance you want to edit from the list of VLL instances.

4.Click the Edit button.

The Target Selection dialog box displays.

NOTE

The device folder under Available Endpoints lists all MPLS capable devices, whether or not they are in the All MPLS Licensed and Configured Devices group. If they are not and if adding the device endpoints in the VPLS configuration would exceed the license limit, then you will not be able to deploy the configurations.

Deleting a VPLS instance

You can delete a VPLS configuration from a device, whether or not it is covered by your MPLS license. Do the following.

1.Select the VPLS instance you want to delete from the VPLS list. You can select more than one by pressing CTRL + click to select the instances.

2.Click the Delete button on the tool bar. The VPLS Configuration box appears.

3.Review the VCIDs and names listed to make sure you want to delete those configurations.

4.Click the Configuration tab to view the list of VPLS instances to be deleted.

5.Click Save to save the configuration, or Cancel if you changed your mind.

The saved configuration appears under the Saved Configuration tab. The VPLS configuration is deleted from the devices only if they are deployed successfully. the Management application will resynch the devices from which the VPLS instance was deleted and remove the VPLS configuration for those devices from its database.

Brocade Network Advisor IP User Manual	895
53-1003056-01