SAN real-time performance data

33

FIGURE 396 Realtime Port Selector dialog box

NOTE

You can set columns in right side of the dialog box for FICON display using Server > Options > SAN DIsplay. The first eight columns will display FC Address, Serial #, Tag, Product Type, Model, Vendor, Port Name, Port Type, and Port WWN.

3.Select the object type from the Show list by which you want to graph performance.

NOTE

Devices with 10GE ports must be running Fabric OS 6.4.1 or later to obtain the correct TE_Port statistics (TX/RX).

NOTE

Devices with 10GE ports must have the RMON MIB enabled on the switch. For more information about the rmon collection command, refer to the Fabric OS Converged Enhanced Ethernet Command Reference.

4.Right-click anywhere in the Available list and select Expand All from the menu.

5.Select the ports or trunks you want to include in the performance graph in the Available list. Press Ctrl or Shift and then click to select more than one port.

6.Click the right arrow to move the selected ports to the Selected list.

7.Click OK.

The Real Time Performance Graphs dialog box displays.

Filtering real-time performance data

To filter real-time performance data from the Real Time Performance Graphs dialog box, complete the following steps.

1.Open the Real Time Performance Graphs dialog box.

For step-by-step instructions, refer to “Generating a real-time performance graph” on page 976.

Brocade Network Advisor IP User Manual

977

53-1003056-01

 

Page 1029
Image 1029
Brocade Communications Systems IP250 user manual Filtering real-time performance data