Brocade Communications Systems IP250 user manual Editing a standard L3 ACL configuration

18 Layer 3 access control list policy

4.Click OK on the L3 ACL Saved Configurations dialog box. The new ACL displays in the ACLs list.

5.To set the configuration type and operations, refer to “Configuring the ACL configuration type and operations” on page 597.

6.(Ethernet routers only) To set the hit statistics duration, refer to “Configuring hit statistics” on page 597.

7.To deploy the configuration, click OK on the Device_Name - L3 ACL Configuration dialog box.

The Deploy to Products - L3 ACL dialog box displays. To deploy the configuration, refer to “Security configuration deployment” on page 629.

Editing a standard L3 ACL configuration

To edit a standard L3 ACL configuration, complete the following steps.

1.Select the device and select Configure > Security > L3 ACL > Product. The Device_Name - L3 ACL Configuration dialog box displays.

2.Select the standard ACL configuration you want to edit in the ACLs list.

3.Click Edit.

The Edit - L3 ACL Configuration dialog box displays.

4.To edit an existing rule, complete the following steps.

a.Select the rule you want to edit in the ACL Entries list and click the left arrow button. The rule displays in the ACL Entry area.

b.Complete step 5 through step 10 in “Creating a standard L3 ACL configuration” on page 581.

The updated ACL rule displays in the ACL Entries list. To update additional rules for the same ACL, repeat step 4.

5.To add a new rule, complete step 5 through step 10 in “Creating a standard L3 ACL configuration” on page 581.

The updated ACL rule displays in the ACL Entries list. To update additional rules for the same ACL, repeat step 5.

6.To delete an existing rule, select the rule you want to delete in the ACL Entries list and click the left arrow button.

7.Use the Up and Down arrow buttons to rearrange the ACLs in the ACL Entries list.

8.Click OK on the Edit - L3 ACL Configuration dialog box.

9.To set the configuration type and operations, refer to “Configuring the ACL configuration type and operations” on page 597.

10.(Ethernet routers only) To set the hit statistics duration, refer to “Configuring hit statistics” on page 597.

11.To deploy the configuration, click OK on the Device_Name - L3 ACL Configuration dialog box.

The Deploy to Products - L3 ACL dialog box displays. To deploy the configuration, refer to “Security configuration deployment” on page 629.

584	Brocade Network Advisor IP User Manual
	53-1003056-01