Brocade Communications Systems IP250 user manual 939

Controller configuration 30

•Source IP address (the address of the client making the request)

•Best IP address (site address provided by the ServerIron ADX product)

•Host

•Zone

•Metric used

This parameter setting is deployed to the controller and to the site ServerIron ADX products specified in this configuration. When you enable logging of this information, the ServerIron ADX product generates a syslog message for each DNS request assisted by the ServerIron ADX product.

NOTE

The ServerIron ADX product sends the log messages only to the external syslog servers you have configured on the ServerIron ADX product. The messages do not appear in the ServerIron ADX product syslog buffer.

7.Select the Save to Flash check box if you want this configuration to be saved to the ServerIron ADX product memory when it is deployed to the product.

8.From the Available Sites/ServerIrons list, expand the site that contains the site ServerIron ADX product that will be under the controller ServerIron ADX control. The list of sites comes from the list on the Site Configuration tab.

Select the site that you want to be controlled by the controller ServerIron ADX product and click the right arrow button to move it into the Selected Sites/ServerIrons list.

The site name, administrative preference, and distributed health checks are listed in the list. Expand the entry for a site to display the individual ServerIron ADX products that belong to that site.

If you want to overwrite the site administrative preference or distributed health check definition for one ServerIron ADX product, select the ServerIron ADX product, and enter new values for the Administrative Preference or Distributed Health Check parameters.

9.From the Available Zones/Hosts list, expand the zone that has the host that will be under the controller ServerIron ADX control. The list of zones comes from the list on the Zone Configuration tab.

Select the host that you want and click the right arrow to move it into the Selected Zones/Hosts list. The zone or host name, TCP/UDP port, policy, and IP weights are listed in the list.

10.If a zone has IP weights, you can change the IP weights for a single host in a zone. Expand the zone, select the host, and click Edit.

The IP Weights dialog box displays.

a.Enter the IP address to which you want to assign an IP weight that is different from the one for the zone or host.

b.Enter the IP weight in the IP Weight field.

NOTE

You can also add and delete IP addresses along with their IP weights.

11.When you have finished, click OK to add the configuration to the Available Zones/Host list on the Controller Configuration dialog box.

Brocade Network Advisor IP User Manual	939
53-1003056-01