Brocade Communications Systems IP250 user manual Filtering a report definition

Event custom reports 37

10.Select the roles that will have view and run access to this definition, then press the right arrow button to move the role in the Selected Roles list.

All Management application users who have the selected roles will be able to view, copy, and run the definition.

NOTE

You can share the available users definition with specific Management application users. If you click the Share this definition (Read only) button, a list of Management application user accounts appears in the Available Users list.

11.Select the user account that will be able to view and run this definition, then press the right arrow button to move that user account in the Selected Users list.

12.Click OK to save the definition, or click Run to launch the report.

Filtering a report definition

You can filter a report definition. To do so, you must first enter a name and title on the Identification tab and select at least one column in the Results Setting tab to run or save a filter. You can select from the available list of SAN products, IP products, or hosts by selecting the appropriate tab.

NOTE

The swDeviceStatusTrap (OID 1.3.6.1.4.1.1588.2.1.1.0.15) trap is sent from the switch whenever there is a device login or logout. This trap is part of the SW-MIB and is listed under the SW-MIB of the SNMP Trap Recipients dialog box, the Event Actions dialog box, and the SNMP Trap Forwarding dialog box. For a complete list of event categories, refer to “Event Categories” on page 1277.

To filter a report definition, complete the following steps.

1.Select Reports > Event Custom Reports.

The Event Custom Reports dialog box displays.

2.Click the Add button.

3.The Add/Edit Report Definition dialog box - Product tab, shown in Figure 499, displays.

Brocade Network Advisor IP User Manual	1197
53-1003056-01