Brocade Communications Systems IP250 Removing a host from active discovery, Click Discover

Host discovery 3

Removing a host from active discovery

If you decide you no longer want the Management application to discover and monitor a specific host, you can delete it from active discovery. Deleting a host also deletes the host data on the server (both system collected and user-defined data) except for user-assigned names for the device port, device node, and device enclosure information.

To delete a host from active discovery, complete the following steps.

1.Select Discover > Host Adapters.

The Discover Host Adapters dialog box displays.

2.Select the host you want to delete from active discovery in the Discovered Hosts table.

3.Click Delete.

4.Click OK on the confirmation message.

The deleted host displays in the Previously Discovered Addresses table.

5.Click Close on the Discover Host Adapters dialog box.

Rediscovering a previously discovered fabric

To return a host to active discovery, complete the following steps.

1.Select Discover > Host Adapters.

The Discover Host Adapters dialog box displays.

2.Select the host you want to return to active discovery in the Previously Discovered Addresses table.

3.Click Discover.

4.Click OK on the confirmation message.

The rediscovered host displays in the Discovered Hosts table.

5.Click Close on the Discover Host Adapters dialog box.

Deleting a host adapter from discovery

To delete a host permanently from discovery, complete the following steps.

1.Select Discover > Host Adapters.

The Discover Host Adapters dialog box displays.

2.Select the host you want to delete permanently from discovery in the Previously Discovered Addresses table.

3.Click Delete.

4.Click OK on the confirmation message.

5.Click Close on the Discover Host Adapters dialog box.

Brocade Network Advisor IP User Manual	101
53-1003056-01