Brocade Communications Systems IP250 user manual Adding or modifying dual mode ports

Port VLANs 27

The Select Classifiers button is disabled by default. To enable the button, select an untagged and classifier-configured port in the Selected Ports list..

FIGURE 322 Select Classifier Groups dialog box

NOTE

The cTag classifier list is disabled when Untagged is selected.

NOTE

The MAC and MAC Group classifier configurations are not supported in Network Advisor

Adding or modifying dual mode ports

You can configure an interface in a VLAN as a dual mode port by assigning it as a tagged port to one VLAN and as an untagged port to another VLAN. You can add a dual mode port to any VLAN except the default VLAN, VLAN 1.

NOTE

Dual mode is not supported on Network OS products.

To add or modify a dual mode port, perform the following steps.

1.Follow the steps in “Adding or modifying port VLANs” on page 827 to familiarize yourself with adding tagged and untagged ports to a VLAN.

2.Select Configuration Manager > VLAN Manager.

The VLAN Manager dialog box - VLAN View tab displays.

3.Click the Product View tab.

4.Click Add.

5.From the Available Ports list on the Ports tab of the Add VLAN dialog box, select the interface that will be added as a dual mode port.

6.Select a VLAN from the Select VLANs list.

Brocade Network Advisor IP User Manual	829
53-1003056-01