Brocade Communications Systems IP250 user manual Wireless devices, Wireless device discovery

13 Wireless devices

Wireless devices

The Management application supports three models of wireless controllers.

TABLE 39	Wireless controller models
Device Name	Firmware required
RFS 4000	Mobility 5.3 or later
RFS 6000	Mobility 5.3 or later
RFS 7000	Mobility 5.3 or later

The Management application supports four models of wireless access points.

TABLE 40	Wireless access points
Device Name	Firmware required
AP 650	Mobility 4.1.1 (standalone mode)
	Mobility 5.1 1 (adaptive mode)
AP 7131	Mobility 4.1.1 (standalone mode)
	Mobility 5.1 1 (adaptive mode)
AP 7131N	Mobility 4.1.1 (standalone mode)
	Mobility 5.1 1 (adaptive mode)
AP 5181	Mobility 2.5.X (standalone mode)
	Mobility 5.1 1 (adaptive mode)
AP 6511	Mobility 4.1.1 (standalone mode)
	Mobility 5.1 1 (adaptive mode)

1 The Management application cannot discover or manage wireless access points running Mobility 5.1.

Wireless device discovery

The Management application enables you to discover individual wireless devices or multiple wireless devices using a discovery profile.

NOTE

Wireless access points in adaptive mode cannot be discovered by the Management application.

Instructions for discovering IP devices are detailed in Chapter 3, “Discovery” and include information about the following:

•“Configuring a discovery profile” on page 64

•“Adding an IP device to discovery” on page 84

After discovery, the Management application inspects the SNMP trap recipient and syslog recipient registration on wireless controllers. If there is an error with the registration, a Master Log event displays as a Warning event. The Warning event provides the reason for the error to enable you to fix the problem.

414	Brocade Network Advisor IP User Manual
	53-1003056-01