Brocade Communications Systems IP250 user manual Predefined conditions

36 Configuration rules

9.Click OK on the Edit Condition dialog box.

10.Click OK on the Edit Configuration Rule dialog box.

11.Click OK on the Edit Monitor dialog box.

The updated policy monitor displays in the Monitors table.

12.Click Close on the Policy Monitor dialog box.

Predefined conditions

The Management application provides predefined conditions. Table 95 lists the predefined conditions that can be used in a block or at the configuration rule level. For example, interface conditions should be used in a port or LAG interface block and SNMP conditions can be used at the rule level.

TABLE 95	Predefined conditions
Name		Description	Use	Matches/	Configuration	Lines in
			regular	Not Matches		exact
			expression			order
Network OS Interface shutdown check		Checks whether the interface is	No	Matches	shutdown	No
		configured as shutdown. This
		condition should be used within an
		interface block.
Network OS Interface NOT shutdown		Condition test fails if the interface is	No	Not Matches	shutdown	No
check		shutdown.
Network OS Interface sflow Enabled		Checks whether sFlow is enabled on	No	Matches	sflow enable	Yes
check		the interface. This condition should			sflow sample-rate
		be used within an interface block.			32768
Network OS Interface All VLANs check		Checks whether the interface is	No	Matches	switchport trunk	No
		configured to be part of all VLANs.			allowed vlan all
		This condition should be used within
		an interface block.

Network OS Interface Trunk mode check

Checks whether the interface is	No	Matches	switchport	Yes
configured to be in trunk mode. This			switchport mode
condition should be used within an			trunk
interface block.

Network OS Interface Switchport	Checks whether the Network OS	No	Matches	switchport	No
mode check	interface is configured to be a
	switchport or not. If not configured,
	the test will fail.

Network OS Interface Access mode check

Checks whether the interface is	No	Matches	switchport	Yes
configured to be in access mode. This			switchport mode
condition should be used within an			access
interface block.

Network OS Interface Port Profiled check

Checks whether the interface port is	No	Matches	port-profile-port	No
profiled. This condition should be
used within an interface block.

1128	Brocade Network Advisor IP User Manual
	53-1003056-01