Brocade Communications Systems IP250 Appending SSL certificates, Chaining SSL certificates

Appending SSL certificates 31

Appending SSL certificates

NOTE

If the ADX is running software release 12.3.00 or later, you can only view and manage SSL certificates that are bound to Virtual IP servers that are in your Area of Responsibility (AOR). To add a Virtual IP server to your AOR, refer to “Assigning products to an AOR” on page 197

You can append an SSL certificate with another certificate.

1.Select Configure > Application Delivery > SSL Certificates. The SSL Certificates dialog box displays.

2.From the Certificate View tab, select the certificate to which you want to append another certificate.

3.Use the Certificates arrow to select Append.

The Append Certificate dialog box displays. The Append Certificate dialog box contains the same fields and components as the Add Certificate dialog box (Figure 389). For information about the fields and components, refer to “Adding an SSL certificate and key file” on page 950.

4.Add the certificate content you want to append to the certificate you selected in step 2 in the Certificate field.

5.Click OK to save changes.

Chaining SSL certificates

NOTE

If the ADX is running software release 12.3.00 or later, you can only view and manage SSL certificates that are bound to Virtual IP servers that are in your Area of Responsibility (AOR). To add a Virtual IP server to your AOR, refer to “Assigning products to an AOR” on page 197

You can chain a certificate to another certificate selected from the Certificate View tab.

NOTE

You cannot chain a key only entry.

1.Select Configure > Application Delivery > SSL Certificates. The SSL Certificates dialog box displays.

2.From the Certificate View tab, select the certificate to which you want to chain another certificate.

Make sure the Status for the certificate to which you want to chain another certificate is Valid.

Brocade Network Advisor IP User Manual	959
53-1003056-01