Brocade Communications Systems IP250 user manual Database tables and fields Module

		Database tables and fields		I
TABLE 234 MODULE (Continued)
Field	Definition		Format	Size
NUM_CPUS	The number of CPUs present in the module.		smallint
HW_REVISION	The vendor-specific hardware revision string. Refer		varchar	64
	entPhysicalHardwareRev of
	RFC4133-ENTITY-MIB.mib for more details.
FW_REVISION	The vendor-specific firmware revision string. Refer		varchar	64
	entPhysicalFirmwareRev of
	RFC4133-ENTITY-MIB.mib for more details.
SW_REVISION	The vendor-specific software revision string. Refer		varchar	64
	entPhysicalSoftwareRev of RFC4133-ENTITY-MIB.mib
	for more details.
MODULE_STATUS	Specifies the status of the module. Possible values		int
	are 0, 2, 3, 4, 8, 9, 10, 11.
	0	- moduleEmpty,
	2	- moduleGoingDown,
	3	- moduleRejected,
	4	- moduleBad,
	8	- moduleConfigured,
	9	- moduleComingUp,
	10 - moduleRunning,
	11 - moduleBlocked.
REDUNDANT_STATUS	Specifies the redundant status of the module.		int
	Possible values are 1, 2, 3, 4, 5.
	1	- other,
	2	- active,
	3	- standby,
	4	- crashed,
	5	- comingUp.

Non management modules always return value as other. Management module returns the rest of the states.

OPERATIONAL_STATUS	Specifies the operational status of the module.		varchar	64
	Possible values for NI series products are as below:
	• CARD_STATE_NOT_PRESENT,
	•	CARD_STATE_INIT,
	•	CARD_STATE_BOOT,
	•	CARD_STATE_LP_SYNC,
	•	CARD_STATE_INTERACTIVE,
	•	CARD_STATE_SW_LOADED,
	•	CARD_STATE_STRIPE_SYNC,
	•	CARD_STATE_UP,
	•	CARD_STATE_DOWN,
	•	CARD_STATE_POWERED_OFF,
	•	CARD_STATE_RECOVERY,
	•	CARD_STATE_REBOOT,
	•	CARD_STATE_SYNC_FID.

Empty string indicates, module has not been inserted to the chassis or not applicable for this product.

Brocade Network Advisor IP User Manual	1481
53-1003056-01