Brocade Communications Systems IP250 user manual Configuring the Cimom Bind Network Address

SMI Agent Configuration Tool 12

4.Click Apply.

NOTE

Changes on this tab take effect after the next CIMOM server restart.

NOTE

You can only restart the server using the Server Management Console (Start > Programs > Management_Application_Name 12.X.X > Server Management Console).

If you disabled SSL, a confirmation message displays. Click Yes to continue.

5.Click Close to close the SMIA Configuration Tool dialog box.

Configuring the CIMOM Bind Network Address

NOTE

You must have SAN - SMI Operation Read and Write privileges to view or make changes on the CIMOM tab. For more information about privileges, refer to “User Privileges” on page 1283.

To configure the network bind address, complete the following steps.

1.Click the CIMOM tab.

2.Select a network address from the IP Configuration Bind Network Address list to which you want to bind the CIMOM server.

The default network address is the host system name.

3.Click Apply.

NOTE

Changes on this tab take effect after the next CIMOM server restart.

NOTE

You can only restart the server using the Server Management Console (Start > Programs > Management_Application_Name 12.X.X > Server Management Console).

4.Click Close to close the SMIA Configuration Tool dialog box.

Brocade Network Advisor IP User Manual	405
53-1003056-01