Brocade Communications Systems IP250 user manual Configuring an internal SCP or Sftp server

5 Software Configuration

Configuring an internal SCP or SFTP server

NOTE

SCP is supported on Fabric OS devices running 5.3 and later.

NOTE

SFTP is supported on Fabric OS devices running 7.0 and later.

To configure the internal SCP or SFTP server settings, complete the following steps.

1.Select Server > Options.

The Options dialog box displays.

2.Select FTP/SCP/SFTP in the Category list. The FTP/SCP/SFTP pane displays (Figure 71).

FIGURE 72 Options dialog box (FTP/SCP/SFTP pane)

3.Select the Use built-in FTP/SCP/SFTP Server option to use the default built-in SCP or SFTP server.

All active fields are mandatory. The default user name is admin. The full path to the built-in SCP or SFTP directory displays in the Root Directory field.

4.Select the SCP/SFTP Server check box.

5.Change your password by entering a new password in the Password and Confirm Password fields.

The default password is passw0rd (where 0 is a zero).

6.Select the protocol (SCP or SFTP) from the Preferred Protocol list.

7.Click Test to test the server.

An “SCP/SFTP Server running successfully” or an error message displays.

If you receive an error message, make sure your credentials are correct, the SCP/SFTP server is stopped, the remote directory path exists, and you have the correct access permission; then try again.

8.Click Apply or OK to save your work.

174	Brocade Network Advisor IP User Manual
	53-1003056-01