Brocade Network Advisor IP User Manual 205
53-1003056-01
User profiles 6
a. Enter NmRoles in the Common Name field.
b. Enter NmRoles in the LDAP Display Name field.
c. Enter a unique object identifier in the Unique x500 Object ID field.
d. Enter a description of the attribute in the Description field.
e. Select Case Insensitive String in the Syntax list.
f. Click OK.
11. Close the Management console.

Configuring authorization details on the external LDAP server

Open the ADSI Edit dialog box on the Active Directory installed server.
1. Select Start > Run.
2. Type adsiedit.msc and press Enter.
3. Right-click CN=User_Name in the CN=Users directory and select Properties.
Where User_Name is the name of the user you created in “Creating an AD user account” on
page203.
4. Select NmAors in the Attributes list and click Edit.
5. Enter the areas of responsibility (such as, All Fabrics, All IP Products) in the Value field and
click OK.
6. Select NmRoles in the Attributes list and click Edit.
7. Enter the Management application user roles (such as Host Administrator, IP System
Administrator, Network Admini strator, Operator, Report User Group, SAN System Administrator,
Security Administrator, Security Officer, and Zone Administrator) in the Value field and click OK.
8. Close the ADSI Edit dialog box.
User profiles
User profiles contain the standard identification information of the user account, such as name,
password, phone number, and e-mail address. The Management application enables you to make
the following changes to your user profile:
•Change your name
•Change your password
•Change your user account description
•Change your phone number
•Change your e-mail address
•View your account state
•View your password policy
•Reset Management application messages
•Enable e-mail notification
•Configure e-mail notification