Brocade Communications Systems IP250 user manual CLI Templates Mpls Endpoint Configuration, Ampp

		CLI Templates	G
TABLE 36	MPLS – Endpoint Configuration
Feature	Description	CLI Commands
MPLS	Used to configure MPLS endpoints.	! FDP, CDP should not be enabled on MPLS endpoints
	Disable FDP, CDP as they are not	! Repeat the following commands for all the MPLS endpoints
	supported in MPLS endpoints.	interface ethernet $<MPLS_END_POINT_1SLOT_PORT>
		enable
		no fdp enable
		no cdp enable
TABLE 37	Network OS – Associate MAC to Port Profile
Feature	Description	CLI Commands
AMPP	Associates the MAC to the existing	no port-profile $<ProfileNameSTRING> activate
	port profile	no port-profile $<ProfileNameSTRING> static
		$<DisAssosicateMACAddress1MAC>
		no port-profile $<ProfileNameSTRING> static
		$<DisAssosicateMACAddress2MAC>
		no port-profile $<ProfileNameSTRING> static
		$<DisAssosicateMACAddress3MAC>
		port-profile $<ProfileNameSTRING> activate
		port-profile $<ProfileNameSTRING> static
		$<AssosicateMACAddress1MAC>
		port-profile $<ProfileNameSTRING> static
		$<AssosicateMACAddress2MAC>
		port-profile $<ProfileNameSTRING> static
		$<AssosicateMACAddress3MAC>
TABLE 38	Network OS – Configure CRC Align Errors Monitor
Feature	Description	CLI Commands
Network OS This template is used to configure		threshold-monitor interface custom type Ethernet area
	threshold and alert values for CRC	CRCAlignErrors threshold timebase $<TimebaseSTRING>
	Align Errors (due to FCS Error or	high-threshold $<HighThresholdValueINTEGER>
	Alignment Error).	low-threshold $<LowThresholdValueINTEGER> buffer
	Possible values for timebase are	$<BufferValueINTEGER>
	day, hour, minute and none.	threshold-monitor interface custom type Ethernet area
	Buffer value cannot be more than	CRCAlignErrors alert above highthresh-action
	average of high plus low threshold. $<AboveHighThreshActionSTRING> lowthresh-action
	Supported Values for High and Low	$<AboveLowThreshActionSTRING>
	Threshold Action Parameters are	threshold-monitor interface custom type Ethernet area
	email, raslog, all, and none.	CRCAlignErrors alert below highthresh-action

$<BelowHighThreshActionSTRING> lowthresh-action $<BelowLowThreshActionSTRING>

threshold-monitor interface apply custom-monitoring

Brocade Network Advisor IP User Manual	1345
53-1003056-01