Brocade Communications Systems IP250 user manual 347

Viewing Call Home configurations 10

•Left arrow button (bottom) — Click to remove the selected event filter (refer to “Removing all event filter from a Call Home center” on page 362 or “Removing an event filter from a device” on page 363) from the selected Call Home center or product. Disabled when no event filter, product, or Call Home center is selected in the Call Home Centers list.

•Call Home Centers list — The Call Home centers, products assigned to the Call Home centers, and event filters assigned to the Call Home centers and products. This list displays the following information:

Centers — A tree with Call Home centers as the parent node, assigned products as subnodes, and event filters as the child node to the assigned products.

Enabled check box — Select the check box to enable the associated Call Home center or clear the check mark to disable the Call Home center. By default, all check boxes are selected during a fresh install.

Support Save check box — Select the check box to enable supportSave, which collects diagnostic information on Fabric OS switches.

IP Address — The IP address of the product.

Node WWN — The node WWN of the product.

Fabric Name — The name of the VCS.

Vendor — The vendor of the product.

Call Home Status — One of the following Call Home statuses for the product:

-Enabled — The product is manageable and Call Home is enabled.

-Disabled — The product is manageable and Call Home is disabled.

-Not Manageable — The product is discovered but not manageable.

-Server Not Registered — The server is not registered to receive Call Home events from the product.

NOTE

Call Home status only displays for Fabric OS, IronWare, and Network OS products.

Domain/RBridge ID — The domainor RBridge ID of the product.

Product Type — The type of product (switch, Layer 2 switch, router, or director).

•Edit Centers button — Select a call home center in the Centers list anc click Edit to open the Configure Call Home Center dialog box and modify Call Home center information (refer to “Editing a Call Home center” on page 349).

•Show/Hide Centers button — Click to open the Centers dialog box and add or delete a Call Home center (refer to “Showing a Call Home center” on page 348 or “Hiding a Call Home center” on page 348).

2.Click OK to close the Call Home dialog box.

Brocade Network Advisor IP User Manual	347
53-1003056-01