Performance monitors

7

The Top Port Errors monitor includes the following data:

Severity icon/monitor title — The worst severity of the data based on the error count shown next to the monitor title.

Port — The port affected by this monitor.

Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) — Displays one of the following:

-Connected Port — The ISL or IFL port on the connected device. Click to launch the switch port properties dialog box.

-Initiator — The initiator port on the connected device. Click to launch the device properties dialog box.

-Target — The target port on the connected device. Click to launch the device properties dialog box.

RX Errors/sec — The number (error rate) of receive errors per second for the duration specified in the monitor.

RX Errors — The number (error count) of receive errors.

TX Errors/sec — The number (error rate) of transmit errors for the duration specified in the monitor.

TX Errors — The number (error count) of transmit errors.

Product — The product affected by this monitor per second.

Type — The type of port (for example, U-Port).

Identifier — The port identifier.

Port Number — The port number.

State — The port state (for example, Enabled).

Status — The port status (for example, Up).

Refreshed — The time of the last update for the monitor.

To customize the monitor to display data by a selected time frame as well as customize the display options, refer to “Editing a preconfigured performance monitor” on page 263.

Accessing additional data from the Top Port Errors monitor

Right-click a row in the monitor to access the shortcut menu available for the associated device. For more information about shortcut menus, refer to “Application menus” on page 1261.

Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more information, refer to “Performance Data” on page 969.

Brocade Network Advisor IP User Manual

247

53-1003056-01

 

Page 299
Image 299
Brocade Communications Systems IP250 user manual Accessing additional data from the Top Port Errors monitor