Brocade Communications Systems IP250 Deleting a policy or rule, Deploying a PBR policy on demand

Policy-based routing 17

The Deploy to Products - PBR dialog box displays. To deploy the PBR policy, refer to “Deploying a PBR policy on demand” on page 553, “Saving a PBR policy deployment” on page 554, or “Scheduling a PBR policy deployment” on page 555.

Deleting a policy or rule

1.Select an Ethernet router, Ethernet core router, or Ehternet Backbone router product and select Configure > Policy Based Routing.

The Product_Name PBR Configuration dialog box displays.

2.Select the policy or rule you want to delete in the Policy and Rules table and click Delete.

A confirmation message displays. Click Yes to delete the selected rule or the selected policy and all associated rules.

3.Click OK on the Product_Name PBR Configuration dialog box.

The Deploy to Products - PBR dialog box displays. To deploy the PBR policy, refer to “Deploying a PBR policy on demand” on page 553, “Saving a PBR policy deployment” on page 554, or “Scheduling a PBR policy deployment” on page 555.

Deploying a PBR policy on demand

To deploy a PBR policy immediately, complete the following steps.

1.Choose one of the following options:

•Deploy now — Select to deploy the configuration immediately on the product or port without saving the deployment definition.

•Save and deploy now — Select to deploy the configuration immediately on the product or port and save the deployment definition for future deployment.

2.Select one of the following save configuration options:

•Save to running — Select to update the running configuration; however, the deployment is not saved to the product’s flash memory.

•Save to running and startup — Select to update the running configuration as well as save the deployment configuration to the product’s flash memory. Selecting this option is the equivalent to a write memory command on the product CLI.

•Save to running and startup then reboot — Select to update the running configuration, save the deployment configuration to the product’s flash memory, and reboot the product. Selecting this option is the equivalent to entering a write memory and a reload command on the product CLI.

3.Enter a name for the deployment in the Name field.

4.Enter a description for the deployment in the Description field.

5.Click the Snapshot Use check box and click the ellipsis button to select the product monitoring template.

NOTE

The Snapshot Use check box is only available for IronWare products. The Pre-Post Snapshot Properties dialog box displays.

Brocade Network Advisor IP User Manual	553
53-1003056-01