Brocade Communications Systems IP250 user manual Viewing predefined configuration conditions

36 Configuration rules

Viewing predefined configuration conditions

1.Select Monitor > Policy Monitor.

The Policy Monitor dialog box displays.

2.Click Add.

The Add Monitor dialog box displays.

3.Click the Switch/Router Checks tab.

4.Select Add > Configuration Rule.

The Add Configuration Rule dialog box displays.

5.Select the predefined condition you want to view and click Edit/View.

The View Condition dialog box displays. This dialog box contains the following fields and components:

•Product field and ellipsis button — Not editable in the View Condition dialog box.

•Configuration list — Not available in the View Condition dialog box.

•Name — The name of the selected condition.

•Description — The description of the selected condition.

•Use regular expression check box — Not available in the View Condition dialog box.

•Configuration the lines below list — Not available in the View Condition dialog box.

•Configuration text box — The configuration lines with which you want to compare the product configuration.

•Lines in exact order check box — Not available in the View Condition dialog box.

•Remediation text box — Details how to correct the failure, if the condition fails.

Remediation content displays in the Configuration Rule Report for each failed condition. The remediation detail cannot be over 1024 ASCII characters.

6.Click Cancel on the View Condition dialog box.

7.Click Cancel on the Add Configuration Rule dialog box.

8.Click Cancel on the Add Monitor dialog box.

9.Click Close on the Policy Monitor dialog box.

Adding a configuration condition

1.Select Monitor > Policy Monitor.

The Policy Monitor dialog box displays.

2.Click Add.

The Add Monitor dialog box displays.

3.Click the Switch/Router Checks tab.

4.Select Add > Configuration Rule.

The Add Configuration Rule dialog box displays.

1124	Brocade Network Advisor IP User Manual
	53-1003056-01