7 User-defined performance monitors

Common

 

Port Utilization Percentage

IP

 

Traffic

Errors

CRC Errors

Discards

 

 

Wireless

 

 

Dropped Events

 

 

MAC Errors

 

 

Back Packets Received

 

 

Tx Errors

7.(Top N and Bottom N monitors only) Select the number of ports to include in a selected measure by entering a number in the For Top N, Bottom N Monitors, N= text box.

Valid values are from 1 through 25. The default is 10.

8.(Top N, Bottom N, and Distribution monitors only) Configure the monitor to show only values greater than or less than a specified value by completing the following steps.

a.Select the Show values check box.

b.Select greater than or less than from the list.

c.Enter a value in the field.

9.(Top N, Bottom N, and Distribution monitors only) Configure threshold numbers and associated colors by completing the following steps.

Depending on the monitor type you select, you can define up to four threshold numbers in increasing or decreasing order and up to five associated threshold colors.

(Top N and Bottom N monitors only) The decreasing order defaults are as follows: 90 and above displays red, 75 and above displays orange, 60 and above displays yellow, and all others display blue. The maximum values allowed are -32,768 through 32,767 for SFP power and

0 through 32,767 for all other measures.

(Distribution monitors only) The increasing order defaults are as follows: 0 through 20 displays green, 21 through 40 displays blue, 41 through 60 displays yellow, 61 through 80 displays orange, and 81 through 100 displays red.

a.(Top N and Bottom N monitors only) Select the check box.

b.Enter a number in the field.

c.Click the color square to launch the Color dialog box.

To pick a color from a swatch, select the Swatches tab. Select a color from the display.

To specify a color based on hue, saturation, and brightness, click the HSV tab. Specify the hue (0 through 360 degrees), saturation (0 through 100%), value (0 through 100%), and transparency (0 through 100%).

To specify a color based on hue, saturation, and lightness, click the HSL tab. Specify the hue (0 through 360 degrees), saturation (0 through 100%), lightness (0 through 100%), and transparency (0 through 100%).

To specify a color based on values of red, green, and blue, click the RGB tab. Specify the values for red (0 through 255), green (0 through 255), blue (0 through 255), and alpha (0 through 255).

274

Brocade Network Advisor IP User Manual

 

53-1003056-01

Page 326
Image 326
Brocade Communications Systems IP250 user manual 274 53-1003056-01