Brocade Communications Systems IP250 user manual 1026 53-1003056-01

33 IP sFlow configuration

For VCS fabrics, if you select Single mode, the following report definition behavior may occur:

-Displays all ports from all members of the selected VCS fabric in the available ports tables on the Product & Port tab.

-Automatically includes fabric changes (adding or deleting members) when you run the report.

-Generates an application event and displays a warning message for the following issues when you edit or run a report:

•If the selected fabric is deleted for any reason (such as, seed switch changed to standalone VDX or merging with another fabric).

•If the selected fabric port is deleted for any reason (such as, member leaving the fabric).

•If the selected standalone VDX is added to a fabric for any reason (VDX device forming a node fabric or joining a fabric).

If you chose Multiple, complete the following steps:

-Use the Traffic Mode selector to choose Inbound, Outbound, or Both as the traffic direction.

-Select products and ports from Available Products/Ports, and move them to Selected Products/Ports, using the right arrow.

For VCS fabrics, if you select Multiple mode, the selected device remains in the report definition regardless of any changes to the fabric or mode.

6. Select the VM tab.

FIGURE 426 Add Report Definition dialog box, VM tab

7.Examine each listed item and decide the following:

-Do you want to enter values in the field, or be prompted to enter the value when running the report? If you want to be prompted, select the Prompt check box. Go to step 9.

-If you choose to list values in the field, would you rather include or exclude the listed values? The selector next to the field may be used to include (=) or exclude (!=) the values. Go to step 9.

-Are the values relevant to the design of your report? If not, leave the fields blank. Continue with step 8.

1026	Brocade Network Advisor IP User Manual
	53-1003056-01