Type, Minimum Links | Brocade Communications Systems IP250 manual

Network OS switches in VCS mode

TABLE 67 LAG parameters on the Network OS switch LAG (Continued)

Status	Indicates whether the LAG is enabled or disabled. You must enable the
	LAG to use the DCB functionality.

Default CoS	The Cost of Service (CoS) value for incoming untagged frames. Values
	are 0-7 or <profile> if the port is profiled. The default CoS is 0.

Type	Displays the limit on the size of the LAG. The type values include
	Standard, where the LAG is limited to 16 ports, and Brocade LAG, where
	the LAG is limited to 8 ports. The default is Standard.

MTU	The maximum transmission unit (MTU). Valid values are from 1522
	through 9216 bytes, and the default is 2500 bytes.

Mode	Displays how the ports are added to the LAG members table in either
	Static or Dynamic mode. The default is Dynamic, Active, but LAG
	members can be Active or Passive if the LAG member is Dynamic.

Minimum Links	Displays the minimum number of operationally UP links needed to
	declare the port channel UP. This field is applicable only for standalone
	Network OS devices.

LAG Members list	Lists the ports that are members of the LAG.

Viewing QoS parameters on the Network OS switch LAG

Table 68 (DCB) and Table 69 (non-DCB) describe the parameters that displays on the View LAG dialog box - QoS tab.

NOTE

Network OS switches in VCS mode support only the DCB map. Network OS switches in standalone mode supports both the DCB and Traffic Class maps.

Mode	The QoS mode (DCB).

Fabric Remap Priority	The fabric remap priority of the LAG. Valid values are CoS 0 through CoS
	6, and the default is CoS 0.

DCB Map	The DCB map that is associated with the FCoE Map. This is a read-only
	field.

Lossless Remap Priority	The FCoE lossless remap priority of the LAG. Valid values are CoS 0
	through CoS 6, and the default is CoS 0.

Brocade Network Advisor IP User Manual	533
53-1003056-01