Initial Switch-on Software will be Installed | Fujitsu D5200

■Initial Switch-on: Software will be Installed

If the PC is connected to a network, the network protocol is required as well as the user and server details. Contact your network administrator if you have any questions about these settings.

When you switch on your PC for the first time, the supplied software is installed and configured. You should plan some time for this, as this process must not be interrupted.

CAUTION

Once the installation has been started the PC must not be switched off!

During installation the PC may only be rebooted when you are requested to do so!

Otherwise the installation will be not be performed correctly. If a fault occurs during the installation, the contents of the hard disk must be completely restored.

Switching on monitor and PC

●Switch the monitor on.

●Switch the PC on. To do this, follow the instructions below.

1 Switch the PC on with the main power switch on the back panel.

Main switch

2Press the ON/OFF switch on the front of the PC.

Power button

7

D5200_1(01-10)

7

12/7/06, 10:59 am

Image 21

Fujitsu D5200 user manual Initial Switch-on Software will be Installed, Switching on monitor and PC

Contents

Declaration of Conformity Esprimo D5200 User’s Manual Important Safety Instructions Class 1 Laser Products Before Reading this Manual Using this Product for High-Safety ApplicationsFor Safe Operation Backing Up the Data Microsoft Service Pack Software License AgreementUse of the software Keep the accompanying CD-ROMs in a safe place Temperature and humidity condition Conventions Used in this Manual IntroductionNotational conventions Important Notes SafetyManufacturer’s notes Energy saving FCC Class B Compliance Statement Cleaning the PC Cleaning the system unit and the monitorTransporting the PC To institutional and corporate customers Disposal and recycling Disposal of the PC unitTo individual customers Disposal of the LCD unit Xii Before Reading This Manual Organization of This Manual Contents Unpacking and Checking the Delivery Steps for Initial SetupExternal devices Drives and boards Installing the Feet Setting Up the PC Vertical positioning Horizontal positioning Point Connecting the mouse Connecting the keyboardConnecting standard keyboard Connect the Monitor, Mouse and Keyboard Switching on monitor and PC Initial Switch-on Software will be Installed Connecting External Devices Connecting cablesDisconnecting cables Connections on the system unit Connecting external devices to the parallel port Connecting external devices to the serial portSettings of the serial port Settings of the parallel port Switching Off the PC Switching On the PC Power indicator Front Panels of the Main Unit of the Personal ComputerVent CD access indicator Disc access indicatorFloppy disk access indicator USB ports Back Panel of the Main Unit of the Personal Computer Mouse port Main switchKeyboard port Monitor port Keyboard Point Settings in Bios Setup Floppy DisksWorking with Floppy Disks Anti-theft Protection and Lead-sealing Check that the upper cover has been firmly installed Installing New Software Mains voltage supply is faultyInternal power supply overloaded Screen stays blank Floppy Disk Cannot be Read or Written No Mouse Pointer Displayed on the ScreenWrong monitor has been set under Window XP Wrong RAM modules have been inserted Restoring the Hard Disk Contents Error Messages on the ScreenTime and/or Date is not Correct Tips Information about Boards System Expansion Before Connecting Peripheral Devices PrecautionsInstall one peripheral device only at one time Taking precautions to static electricity Do not disassemble the power unitUse Acpi support peripheral devices Preparing screwdrivers Removing the Main Unit Cover How to remove the main unit cover Installing Memory Locations for memory to be installed Memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Expansion cards to be installed Locations for expansion cards to be installed Press and raise the slot cover lock Remove the slot cover Installing expansion cards Insert the expansion card into the port Install the installing fitting Electrical Data Point D5200533-39 12/7/06, 1100 am