Important Notes, Safety, Manufacturer’s notes | Fujitsu D5200

Important Notes

In this chapter you will find information regarding safety which is essential to take note of when working with your PC. The manufacturer's notes contain helpful information on your PC.

Safety

CAUTION

During installation and before operating the device, please observe the instructions on environmental conditions in the chapter entitled "Technical data" as well as the instructions in the chapter "Preparing for Use".

Please check whether the device is correctly set for the local power supply (see "Preparing for Use" chapter).

The main switch and the ON/OFF switch do not disconnect the system unit from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the grounded mains outlet.

Caution: components in the system can get very hot.

Manufacturer’s notes

Keep this operating manual together with your device. If you pass on the device to third parties, you should include this manual.

Energy saving

When the PC is delivered, some energy-saving functions are already set If you are not using your PC, switch it off.

In the BIOS Setup you may set further energy-saving functions for the PC.

Depending on the operating system, you can set additional power-management features.

Energy saving under Windows XP

The Screen Saver tab allows you to set energy-saving functions for your screen. Select the

following item in the menu: Start → Settings →	Control Panel →	Display → Display Properties →
Screen Saver → Energy saving features of monitor.
With the default setting Control Panel →	Power Options →	Advanced additional power

management features of Windows XP are available.

viii

D5200_0(INTRO)

8

12/7/06, 10:58 am

Image 8

Fujitsu D5200 user manual Important Notes, Safety, Manufacturer’s notes, Energy saving under Windows XP

Contents

Esprimo D5200 User’s Manual Declaration of Conformity Important Safety Instructions Class 1 Laser Products Using this Product for High-Safety Applications Before Reading this ManualFor Safe Operation Backing Up the Data Use of the software Microsoft Service PackSoftware License Agreement Temperature and humidity condition Keep the accompanying CD-ROMs in a safe place Notational conventions Conventions Used in this ManualIntroduction Safety Important NotesManufacturer’s notes Energy saving FCC Class B Compliance Statement Transporting the PC Cleaning the PCCleaning the system unit and the monitor Disposal and recycling Disposal of the PC unit To institutional and corporate customersTo individual customers Disposal of the LCD unit Xii Organization of This Manual Before Reading This Manual Contents Steps for Initial Setup Unpacking and Checking the DeliveryExternal devices Drives and boards Setting Up the PC Installing the Feet Vertical positioning Horizontal positioning Point Connecting the keyboard Connecting the mouseConnecting standard keyboard Connect the Monitor, Mouse and Keyboard Initial Switch-on Software will be Installed Switching on monitor and PC Disconnecting cables Connecting External DevicesConnecting cables Connections on the system unit Connecting external devices to the serial port Connecting external devices to the parallel portSettings of the serial port Settings of the parallel port Switching On the PC Switching Off the PC Vent Power indicatorFront Panels of the Main Unit of the Personal Computer Disc access indicator CD access indicatorFloppy disk access indicator USB ports Back Panel of the Main Unit of the Personal Computer Main switch Mouse portKeyboard port Monitor port Keyboard Point Working with Floppy Disks Settings in Bios SetupFloppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealing Internal power supply overloaded Installing New SoftwareMains voltage supply is faulty Screen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Window XP Wrong RAM modules have been inserted Error Messages on the Screen Restoring the Hard Disk ContentsTime and/or Date is not Correct Tips System Expansion Information about Boards Install one peripheral device only at one time Before Connecting Peripheral DevicesPrecautions Do not disassemble the power unit Taking precautions to static electricityUse Acpi support peripheral devices Preparing screwdrivers How to remove the main unit cover Removing the Main Unit Cover Installing Memory Table of combinations of memory Locations for memory to be installedMemory to be installed Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installed Installing expansion cards Press and raise the slot cover lock Remove the slot cover Install the installing fitting Insert the expansion card into the port Electrical Data Point D5200533-39 12/7/06, 1100 am