Do not disassemble the power unit | Fujitsu D5200 manual

●Do not disassemble the power unit.

The power unit is a box-shaped device located at the rear of the internal main unit of the personal computer.

●Precautions on handling internal cables or devices Do not scratch or machine internal cables or devices.

●Taking precautions to static electricity

The printed board and electronic devices in the internal peripheral devices are not protected by cases or other materials. They may be damaged due to static electricity generated in your body. Before handling them, always touch an appropriate metal object to discharge static from your body.

●Do not touch the printed board surface, soldered areas, or port areas. Hold metal areas or the edges of the printed board.

●Power to peripheral devices

The power to peripheral devices is generally turned on before powering on the main unit of the personal computer, however, there are some peripheral devices that will be powered on after powering on the main unit of the personal computer. Read the manual for peripheral devices.

●Use ACPI support peripheral devices.

This personal computer supports ACPI (one of the power control standards regarding energy- saving).

If your computer uses the operating system that supports ACPI, and when it uses peripheral devices, inquire the manufactures of peripheral devices about whether these devices support ACPI. The use of a peripheral device that does not support ACPI might cause malfunction of the personal computer and peripheral devices.

●Preparing screwdrivers

Phillips-head screwdrivers may be required for installing or removing peripheral devices. To avoid damage to the head of the screw, use a screwdriver of an appropriate size.

26

D5200_4(24-32)

26

12/7/06, 10:59 am

Image 40

Fujitsu D5200 Do not disassemble the power unit, Taking precautions to static electricity, Preparing screwdrivers

Contents

Esprimo D5200 User’s Manual Declaration of Conformity Important Safety Instructions Class 1 Laser Products Using this Product for High-Safety Applications Before Reading this ManualFor Safe Operation Backing Up the Data Software License Agreement Microsoft Service PackUse of the software Temperature and humidity condition Keep the accompanying CD-ROMs in a safe place Introduction Conventions Used in this ManualNotational conventions Safety Important NotesManufacturer’s notes Energy saving FCC Class B Compliance Statement Cleaning the system unit and the monitor Cleaning the PCTransporting the PC Disposal and recycling Disposal of the PC unit To institutional and corporate customersTo individual customers Disposal of the LCD unit Xii Organization of This Manual Before Reading This Manual Contents Steps for Initial Setup Unpacking and Checking the DeliveryExternal devices Drives and boards Setting Up the PC Installing the Feet Vertical positioning Horizontal positioning Point Connecting the keyboard Connecting the mouseConnecting standard keyboard Connect the Monitor, Mouse and Keyboard Initial Switch-on Software will be Installed Switching on monitor and PC Connecting cables Connecting External DevicesDisconnecting cables Connections on the system unit Connecting external devices to the serial port Connecting external devices to the parallel portSettings of the serial port Settings of the parallel port Switching On the PC Switching Off the PC Front Panels of the Main Unit of the Personal Computer Power indicatorVent Disc access indicator CD access indicatorFloppy disk access indicator USB ports Back Panel of the Main Unit of the Personal Computer Main switch Mouse portKeyboard port Monitor port Keyboard Point Floppy Disks Settings in Bios SetupWorking with Floppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealing Mains voltage supply is faulty Installing New SoftwareInternal power supply overloaded Screen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Window XP Wrong RAM modules have been inserted Error Messages on the Screen Restoring the Hard Disk ContentsTime and/or Date is not Correct Tips System Expansion Information about Boards Precautions Before Connecting Peripheral DevicesInstall one peripheral device only at one time Do not disassemble the power unit Taking precautions to static electricityUse Acpi support peripheral devices Preparing screwdrivers How to remove the main unit cover Removing the Main Unit Cover Installing Memory Memory to be installed Locations for memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installed Installing expansion cards Press and raise the slot cover lock Remove the slot cover Install the installing fitting Insert the expansion card into the port Electrical Data Point D5200533-39 12/7/06, 1100 am