Manuals / Fujitsu / Computer Equipment / Personal Computer

Fujitsu D5200 user manual Connecting External Devices, Connecting cables, Disconnecting cables

Models: D5200

1 53

Download 53 pages 50.73 Kb

Page 22

■Connecting External Devices

CAUTION

Do not connect or disconnect cables during a thunderstorm.

Always take hold of the actual plug. Never unplug a cable by pulling the cable itself. Connect and disconnect the cables in the order described below.

With the exception of USB devices, always remove all power plugs before connecting external devices!

Read the documentation on the external device before connecting it.

Connecting cables

●Turn off all power and equipment switches.

●Pull all power plugs out of grounded mains outlets.

●Connect all cables at the system unit and peripherals. You must observe the information provided in the chapter “Important notes”.

●Plug all data communication cables into the utility sockets.

●Plug all power cables into the grounded mains outlets.

Disconnecting cables

●Turn off all power and equipment switches.

●Pull all power plugs out of grounded mains outlets.

●Unplug all data communication cables from the utility sockets.

●Disconnect all cables from the system unit and peripherals.

USB devices are hot-pluggable. This allows cables from USB devices to be connected and disconnected with the system switched on.

Additional information can be found in the documentation for the USB devices.

8

D5200_1(01-10)

8

12/7/06, 10:59 am

Image 22

Fujitsu D5200 user manual Connecting External Devices, Connecting cables, Disconnecting cables

Contents

Esprimo D5200 User’s Manual Declaration of ConformityImportant Safety Instructions Class 1 Laser Products For Safe Operation Using this Product for High-Safety ApplicationsBefore Reading this Manual Backing Up the DataSoftware License Agreement Microsoft Service PackUse of the software Temperature and humidity condition Keep the accompanying CD-ROMs in a safe placeIntroduction Conventions Used in this ManualNotational conventions Manufacturer’s notes SafetyImportant Notes Energy savingFCC Class B Compliance Statement Cleaning the system unit and the monitor Cleaning the PCTransporting the PC To individual customers Disposal and recycling Disposal of the PC unitTo institutional and corporate customers Disposal of the LCD unitXii Organization of This Manual Before Reading This ManualContents External devices Steps for Initial SetupUnpacking and Checking the Delivery Drives and boardsSetting Up the PC Installing the FeetVertical positioning Horizontal positioning Point Connecting standard keyboard Connecting the keyboardConnecting the mouse Connect the Monitor, Mouse and KeyboardInitial Switch-on Software will be Installed Switching on monitor and PCConnecting cables Connecting External DevicesDisconnecting cables Connections on the system unit Settings of the serial port Connecting external devices to the serial portConnecting external devices to the parallel port Settings of the parallel portSwitching On the PC Switching Off the PCFront Panels of the Main Unit of the Personal Computer Power indicatorVent Floppy disk access indicator Disc access indicatorCD access indicator USB portsBack Panel of the Main Unit of the Personal Computer Keyboard port Main switchMouse port Monitor portKeyboard Point Floppy Disks Settings in Bios SetupWorking with Floppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealingMains voltage supply is faulty Installing New SoftwareInternal power supply overloaded Screen stays blank Wrong monitor has been set under Window XP No Mouse Pointer Displayed on the ScreenFloppy Disk Cannot be Read or Written Wrong RAM modules have been insertedTime and/or Date is not Correct Error Messages on the ScreenRestoring the Hard Disk Contents TipsSystem Expansion Information about BoardsPrecautions Before Connecting Peripheral DevicesInstall one peripheral device only at one time Use Acpi support peripheral devices Do not disassemble the power unitTaking precautions to static electricity Preparing screwdriversHow to remove the main unit cover Removing the Main Unit CoverInstalling Memory Memory to be installed Locations for memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installedInstalling expansion cards Press and raise the slot cover lock Remove the slot coverInstall the installing fitting Insert the expansion card into the portElectrical Data Point D5200533-39 12/7/06, 1100 am