Point | Fujitsu D5200 specification

*1 : Some application may show the other name of this processor.

*2 : The capacity of the disk provided in this manual is calculated by that 1 MB=1000 x 1000 bytes and 1 GB=1000 x 1000 x 1000 bytes.

With the calculation that 1 MB=1024 x 1024 bytes and 1 GB=1024 x 1024 x 1024 bytes, the capacity actually displayed on Windows becomes less than the disk capacity described in this manual.

*3 : There is no guarantee that your adapter can carry out communication normally with any other USB support peripheral devices.

When USB 1.1 compliance peripheral devices are connected, they can be used by specifications for USB 1.1.

The max rating of USB devices is 500mA per port. Please see the manual with the USB devices.

*4 : To reduce energy consumption when powering-off, switch the main switch to the “” side, or unplug the power plug from the AC cable.

*5 : The power consumption is for system only, not including outlet devices.

*6 : Values differ depending on the device configuration you use.

*7 : Service Pack2 is applied at shipment.

POINT

Note that, for improvement, specifications for this personal computer are subject to change without notice.

38

D5200_5(33-39)

38

12/7/06, 11:00 am

Image 52

Fujitsu D5200 user manual Point

Contents

Esprimo D5200 User’s Manual Declaration of Conformity Important Safety Instructions Class 1 Laser Products Using this Product for High-Safety Applications Before Reading this ManualFor Safe Operation Backing Up the Data Software License Agreement Microsoft Service PackUse of the software Temperature and humidity condition Keep the accompanying CD-ROMs in a safe place Introduction Conventions Used in this ManualNotational conventions Safety Important NotesManufacturer’s notes Energy saving FCC Class B Compliance Statement Cleaning the system unit and the monitor Cleaning the PCTransporting the PC Disposal and recycling Disposal of the PC unit To institutional and corporate customersTo individual customers Disposal of the LCD unit Xii Organization of This Manual Before Reading This Manual Contents Steps for Initial Setup Unpacking and Checking the DeliveryExternal devices Drives and boards Setting Up the PC Installing the Feet Vertical positioning Horizontal positioning Point Connecting the keyboard Connecting the mouseConnecting standard keyboard Connect the Monitor, Mouse and Keyboard Initial Switch-on Software will be Installed Switching on monitor and PC Connecting cables Connecting External DevicesDisconnecting cables Connections on the system unit Connecting external devices to the serial port Connecting external devices to the parallel portSettings of the serial port Settings of the parallel port Switching On the PC Switching Off the PC Front Panels of the Main Unit of the Personal Computer Power indicatorVent Disc access indicator CD access indicatorFloppy disk access indicator USB ports Back Panel of the Main Unit of the Personal Computer Main switch Mouse portKeyboard port Monitor port Keyboard Point Floppy Disks Settings in Bios SetupWorking with Floppy Disks Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealing Mains voltage supply is faulty Installing New SoftwareInternal power supply overloaded Screen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Window XP Wrong RAM modules have been inserted Error Messages on the Screen Restoring the Hard Disk ContentsTime and/or Date is not Correct Tips System Expansion Information about Boards Precautions Before Connecting Peripheral DevicesInstall one peripheral device only at one time Do not disassemble the power unit Taking precautions to static electricityUse Acpi support peripheral devices Preparing screwdrivers How to remove the main unit cover Removing the Main Unit Cover Installing Memory Memory to be installed Locations for memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installed Installing expansion cards Press and raise the slot cover lock Remove the slot cover Install the installing fitting Insert the expansion card into the port Electrical Data Point D5200533-39 12/7/06, 1100 am