Switching On the PC, Switching Off the PC | Fujitsu D5200 manual

Chapter 2 - Operation

Switching On the PC

●If necessary, switch the monitor on (see the operating manual for the monitor).

●Switch the PC on with the main power switch on the rear of the PC.

●Press the ON/OFF switch on the front of the PC.

The power-on indicator lights green and the PC is started.

Switching Off the PC

●Shut down the operating system properly. For Windows: select Shut Down from the Start menu.

●If the operating system does not automatically switch the PC off, turn the PC to ready-to-operate

when requested to do so by pressing the ON/OFF switch.

If the PC is ready-to-operate, the PC consumes very little power.

Switch off the PC at the power switch. The PC no longer uses any power.

The main power switch and the power button do not disconnect the PC from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the socket.

●If necessary, switch the monitor off (see the operating manual for the monitor).

11

D5200_2(11-19)

11

12/7/06, 10:59 am

Image 25

Fujitsu D5200 user manual Switching On the PC, Switching Off the PC

Contents

Declaration of Conformity Esprimo D5200 User’s Manual Important Safety Instructions Class 1 Laser Products Before Reading this Manual Using this Product for High-Safety ApplicationsFor Safe Operation Backing Up the Data Software License Agreement Microsoft Service PackUse of the software Keep the accompanying CD-ROMs in a safe place Temperature and humidity condition Introduction Conventions Used in this ManualNotational conventions Important Notes SafetyManufacturer’s notes Energy saving FCC Class B Compliance Statement Cleaning the system unit and the monitor Cleaning the PCTransporting the PC To institutional and corporate customers Disposal and recycling Disposal of the PC unitTo individual customers Disposal of the LCD unit Xii Before Reading This Manual Organization of This Manual Contents Unpacking and Checking the Delivery Steps for Initial SetupExternal devices Drives and boards Installing the Feet Setting Up the PC Vertical positioning Horizontal positioning Point Connecting the mouse Connecting the keyboardConnecting standard keyboard Connect the Monitor, Mouse and Keyboard Switching on monitor and PC Initial Switch-on Software will be Installed Connecting cables Connecting External DevicesDisconnecting cables Connections on the system unit Connecting external devices to the parallel port Connecting external devices to the serial portSettings of the serial port Settings of the parallel port Switching Off the PC Switching On the PC Front Panels of the Main Unit of the Personal Computer Power indicatorVent CD access indicator Disc access indicatorFloppy disk access indicator USB ports Back Panel of the Main Unit of the Personal Computer Mouse port Main switchKeyboard port Monitor port Keyboard Point Floppy Disks Settings in Bios SetupWorking with Floppy Disks Anti-theft Protection and Lead-sealing Check that the upper cover has been firmly installed Mains voltage supply is faulty Installing New SoftwareInternal power supply overloaded Screen stays blank Floppy Disk Cannot be Read or Written No Mouse Pointer Displayed on the ScreenWrong monitor has been set under Window XP Wrong RAM modules have been inserted Restoring the Hard Disk Contents Error Messages on the ScreenTime and/or Date is not Correct Tips Information about Boards System Expansion Precautions Before Connecting Peripheral DevicesInstall one peripheral device only at one time Taking precautions to static electricity Do not disassemble the power unitUse Acpi support peripheral devices Preparing screwdrivers Removing the Main Unit Cover How to remove the main unit cover Installing Memory Memory to be installed Locations for memory to be installedTable of combinations of memory Installing memory D5200424-32 12/7/06, 1059 am Point Installing the Expansion Card Expansion cards to be installed Locations for expansion cards to be installed Press and raise the slot cover lock Remove the slot cover Installing expansion cards Insert the expansion card into the port Install the installing fitting Electrical Data Point D5200533-39 12/7/06, 1100 am