Fujitsu D5200 user manual Setting Up the PC, Installing the Feet

■Setting Up the PC

CAUTION

When installing your PC, give consideration to the recommendations and safety notes.

Set up the PC only in its correct orientation. The points to observe are illustrated on the following pages.

Do not expose the PC to extreme environmental conditions and protect it from dust, humidity and heat.

When installing the PC, provide sufficient clearance around the PC, as indicated in the “Technical data” chapter to ensure adequate ventilation. In order to avoid overheating, do not cover the ventilation area of the monitor or the PC.

Do not place several system units one above the other.

The PC can be used either horizontally or vertically. We recommend that you place your equipment on a surface with good anti-slip qualities. In view of the multitude of different finishes and varnishes used on furniture, it is possible that the rubber / plastic feet of the devices will mark the surface they stand on.

■Installing the Feet

POINT

The cables of the keyboard and the mouse can be collected through the slot of the foot.

The slot

for

passing

through

the cable

2

D5200_1(01-10) 2 12/7/06, 10:58 am