Brocade Communications Systems IP250 Viewing FCoE parameters on the Network OS switch LAG

16 Network OS switches in VCS mode

TABLE 68 QoS (DCB) parameters on the Network OS switch LAG. (Continued)

Field/ComponentDescription

Precedence	This number determines the map’s priority. Valid values are from 1
	through 100.

DCB Map Parameters

•

•

•

•

PG ID — Lists the priority group ID (15.0 to 15.7 and 0 to 7).

%Bandwidth — Lists the bandwidth value for priority group IDs 0-7. The total of all priority groups must equal 100%.

Priority Flow Control — When enabled, enables priority flow control on individual priority groups.

CoS — Lists the Class of Service (CoS) value that corresponds to the Priority Group ID rows. The CoS value must be mapped to at least one of the Priority Group IDs (0-7).

QoS - Non-DCB

TABLE 69 QoS (non-DCB) parameters on the Network OS switch LAG

Field/ComponentDescription

Mode	The mode of Quality of Service (QoS) assigned to the LAG (non-DCB).
Trust	Indicates whether the Ethernet trust of the LAG is enabled or disabled.
NOTE: Applicable only for standalone
Network OS devices.
Flow Control	The Ethernet priority flow control mode of the LAG. The default flow
	control mode is Off. Possible modes are as follows:
	•	Off
	•	802.3x pause
	•	Tx On or Off
	•	Rx On or Off
	•	Priority Flow Control. For this mode, the Tx and Rx values for each
		CoS display in the table.
Maps	Displays details about the following DCB maps:
	• CoS to CoS — Displays the details of the CoS to CoS map assigned
	•	to the port.
		Traffic Class — Displays the details of the Traffic Class map

assigned to the port.

Viewing FCoE parameters on the Network OS switch LAG

Table 70 describes the parameters that displays on the View LAG dialog box - FCoE tab.

NOTE

The Interface mode is None and the L2 mode is empty for the FCoE-provisioned LAG.

534	Brocade Network Advisor IP User Manual
	53-1003056-01