Brocade Communications Systems IP250 Renaming a zone configuration, Deleting a zone configuration

19 Zoning configuration

5.Click Yes on the confirmation message.

If the deactivation succeeded, the zone configuration no longer displays in the Active Zone Configuration tab.

If the deactivation failed, the zone configuration still displays in the Active Zone Configuration tab.

6.Click OK or Apply to save your changes.

Any zones or zone configurations you have changed are saved in the zone database.

Renaming a zone configuration

1.Select Configure > Zoning > Fabric. The Zoning dialog box displays.

2.Click the Zone DB tab if that tab is not automatically displayed.

3.Select a fabric from the Zoning Scope list.

This identifies the target entity for all subsequent zoning actions and displays the zoning database for the selected entity.

4.Right-click the name of the zone configuration you want to change in the Zone Configurations list and select Rename.

5.Type the new name for the zone configuration.

For zone configuration name requirements and limitations, refer to “Zoning naming conventions” on page 639.

6.Press Enter to save the new name.

7.Click OK or Apply to save your changes.

Any zones or zone configurations you have changed are saved in the zone database.

Deleting a zone configuration

1.Select Configure > Zoning > Fabric. The Zoning dialog box displays.

2.Click the Zone DB tab if that tab is not automatically displayed.

3.Select a fabric from the Zoning Scope list.

This identifies the target entity for all subsequent zoning actions and displays the zoning database for the selected entity.

4.Select one or more zone configurations in the Zone Configurations list that you want to delete, then right-click and select Delete.

A message displays asking you to confirm the deletion.

5.Click Yes to delete the selected zone configuration.

The message closes and the selected zone configurations are removed from the Zone Configurations list.

654	Brocade Network Advisor IP User Manual
	53-1003056-01