S t e a m e r 625 - A
A. Press the UP or DOWN Arrow buttons to change the valve 8 OFF time.
B. Press the Steamer LOGO button to store the new valve OFF time.
NOTE: Pressing the Product 3 button at any time exits the Program mode without storing the change.
OFF 3.0 | OFF 3.0 |
A. Press the UP or DOWN Arrow buttons to change the 10 number of water cycles.
B. Press the Steamer LOGO button to store the new water cycle number and exit the Programming mode.
NOTE: Pressing the Product 3 button at any time exits the Program mode without storing the change.
The display now shows the product’s number of
9 valve cycles.
CYCLES 2
11
The display now shows the current product set temperature.
CYCLES 3 | CYCLES 3 |
12 Platen temperature can be set between
A. Press the UP or DOWN Arrow buttons to scroll to the desired temperature.
B. Press the Rapids Steamer LOGO button to store the desired temperature.
NOTE: Pressing the PRODUCT 3 button at any time exits the Program mode without storing the change.
255 
The display now shows the time delay between when the 13 product is finished and when the alarm sounds.
The delay can be set for 0.0 to 10.0 seconds.
A. Press the UP or DOWN Arrow buttons to scroll to the desired time delay.
B. Press the Rapid Steamer LOGO button to store the desired time and to exit the Programming mode. .
NOTE: Pressing the PRODUCT 3 button at any time exits the Program mode without storing the change.
TEMP 275 |
| TEMP 275 | 5 | AL DLY 2.5 |
|
|
|
|
|
|
|
|
|
|
Error Messages
ERROR MESSAGES | ACTION |
No Heat Error. | Call service technician. |
Steamer | 5 | Printed in USA 0910 © 2003 |
