S t e a m e r 6 2 5 - A
Programming Product Name & Water Cycle
The Program button menus can be changed to any of the following menu items.
PROD1 thru PROD12 can be selected to program additional product names.
“– – –
Filet | Large | PROD1 | PROD2 | PROD3 |
PROD4 | PROD5 | PROD6 | PROD7 | PROD8 |
PROD9 | PROD10 | PROD11 | PROD12 | – – – – |
2 | B. Press the UP or DOWN Arrow button to scroll through the |
product selections. |
C. Press the Steamer LOGO button to store the new product name.
To enter custom product names, proceed to step 3.
NOTE: Pressing the Product 3 button at any time exits the Program mode without storing the change.
A. Press and hold the LOGO button and a PRODUCT button for 1 approximately 6 seconds. The display will show the current
assigned product for the button pressed.
NOTE: A decimal point will appear and flash on the right side of the display to indicate Programming mode.
FILET
Press and hold the Prince Castle LOGO button first, then press
3 and hold the Steamer Logo button for 6 seconds.
The display will show the product name with the
NOTE: Must be in Programming mode.
PROD 1 | PROD 1 | PROD 1 |
A. Press the UP or DOWN Arrow buttons to change the 4
B. Press the Product 1 or Product 4 button to move the cursor to the next character.
C. Repeat steps A and B for each character.
D. Press the Steamer LOGO button to store the new product name.
NOTE: Pressing the Product 3 button at any time exits the Program mode without storing the change.
CROD 1 | CHKN 1 |
5 | The display now shows the product’s water valve ON time in |
seconds. |
ON 1.1
A. Press the UP or DOWN Arrow buttons to change the valve 6 ON time.
B. Press the Steamer LOGO button to store the new valve ON time.
NOTE: Pressing the Product 3 button at any time exits the Program mode without storing the change.
7 | The display now shows the product’s water valve OFF time |
in seconds. |
OFF 2.5
ON 1.1 | ON 1.1 |
Steamer | 4 | Printed in USA 0910 © 2003 |