Brocade Communications Systems IP250 user manual Show interface ethernet $portSLOTPORTSlot#/Port#

25 Monitoring configurations

f.Edit the parameter by entering the variable or character string you want to use for the parameter in place of the name variable.

NOTE

Each parameter must be unique. The Management application does not check for duplicate parameters.

show interface ethernet $<portSLOT_PORT:[Slot#]/Port#>

In the example, show interface ethernet is the CLI command, port is the parameter variable, SLOT_PORT is the parameter type, and [Slot#]/Port# is the format for the port number.

g.(Optional) Select a template from the CLI Templates folder and click the right arrow to include it in the configuration.

This allows you to deploy more than one template to a device in a single deployment. Only templates defined in the Management application display. This list only displays when there is at least one user-defined CLI template.

6.Click the Parameters tab and complete the following steps.

FIGURE 311 CLI Template dialog box - Parameters tab

a.Select the Always prompt for parameter review/edit during manual deployment check to display the Parameter tab in the Prompt dialog box during manual deployment.

Clear to not display the Parameter tab in the Prompt dialog box during manual deployment.

When selected, the Parameter tab displays in the Prompt dialog box during manual deployment even if you filled in all parameter values on the Parameters tab of the CLI Template dialog box.

b.Select one of the following options from the Mode list for the parameter import mode.

•Same Values for each Target — Select to set the same values for all selected targets.

•Different Values for each Target — Select to set individual values for the selected targets.

798	Brocade Network Advisor IP User Manual
	53-1003056-01