Brocade Communications Systems IP250 user manual Viewing port distribution data details

User-defined performance monitors 7

•Fabric — The fabric to which the device belongs.

•Product Type — The type of product (for example, switch).

•State — The product state (for example, Offline).

•Status — The product status (for example, Reachable).

•Tag — The product tag.

•Serial # — The serial number of the product.

•Model — The product model.

•Port Count — The number of ports on the product.

•Firmware — The firmware level running on the product.

•Location — The location of the product.

•Contact — A contact name for the product.

3.Click Close.

Viewing port distribution data details

Each bar on the port distribution graph maps directly to one of the five percentage ranges defined for the distribution monitor (refer to “Distribution performance monitors” on page 267).

1.Double-click a bar in the graph.

The Monitor_Title Data Details dialog box displays.

2.Review the data.

The port distribution data details include the following fields and components:

•Port — The port affected by the selected measure.

•TX/RX — Whether the port is transmitting (TX) or receiving (RX) data. This column is not available for all measures.

•Measure_Type — This column depends on which measure you select for the monitor.

Common

-Port Utilization Percentage — The memory utilization percentage.

-Traffic — The traffic in mbps.

-CRC Errors — The number of CRC errors.

IP

-Errors — The number of errors.

-Discards — The number of discarded frames.

Wireless

-Dropped Events — The number of dropped events.

-MAC Errors — The number of MAC errors.

-Back Packets Received — The number of bad packets received.

-Tx Errors — The number of transmit errors.

•Product — The product affected by this monitor.

•Type — The type of port (for example, U-Port).

•Identifier — The port identifier.

Brocade Network Advisor IP User Manual	277
53-1003056-01