Brocade Communications Systems IP250 user manual Monitoring configurations

Monitoring configurations 25

NOTE

Closing the Deployment Status dialog box does not stop deployment.

To check the results of the deployment in the Product CLI Report, refer to “CLI deployment reports” on page 802. For details about valid and invalid responses when you deploy a configuration, refer to “Valid and invalid responses from devices” on page 790.

Monitoring configurations

You can create, modify, duplicate, and delete a monitoring configuration from the CLI Configuration dialog box. Monitoring configurations allow you to create device reports by entering a set of show CLI commands. To view a list of existing configurations, refer to “Viewing existing templates” on page 778. For information about the example templates, refer to “CLI Templates” on page 1339.

Creating a monitoring configuration

To create a new monitoring configuration, complete the following steps.

1.Select Configure > CLI Configuration. The CLI Configuration dialog box displays.

2.Click Add.

The CLI Template dialog box displays.

FIGURE 308 CLI Template dialog box - Definition tab

3.Click the Definition tab and complete the following steps.

a. Enter a name and description for the new configuration.

NOTE

Do not use special characters in the name.

b.Select Monitoring to create product reports using show commands.

c.To change CLI credentials, click Change Template Credentials and refer to “Changing product credentials” on page 784.

Brocade Network Advisor IP User Manual	795
53-1003056-01