3 Individual IP device discovery

a.Click the SNMPv3 Read Only tab.

b.Enter the SNMPv3 user name in the User ID field.

The user name can be from 1 through 16 characters long, case sensitive, and allows all printable ASCII characters.

c.Select one of the following protocols from the Authentication Protocol list:

None

HMAC_MD5

HMAC_SHA

d.Enter the SNMPv3 authentication password in the Authentication Password field.

The password can be from 8 through 16 characters long, case sensitive, and allows all printable ASCII characters. The password display as asterisks.

e.Select one of the following privacy protocol types from the Privacy Protocol list:

None

CBC-DES

CFB_AES-128

If you select a privacy protocol, the selected protocol encrypts the SNMP request and response packets.

f.Enter the privacy password in the Privacy Password field.

The password can be from 1 through 16 characters long, case sensitive, and allows all printable ASCII characters. The password display as asterisks.

7.Configure the SNMPv1 and SNMPv2c read-write credentials by completing the following steps.

a.Click the SNMPv1/v2c Read/Write tab.

FIGURE 37 SNMPv1/v2c credentials

b.Enter the community string in the Community field.

The community string can be from 1 through 16 characters long, case sensitive, and allows all printable ASCII characters. The string displays as asterisks.

NOTE

If you do not enter a community string in the field, discovery uses the "public" and "private" community strings to probe the devices.

86

Brocade Network Advisor IP User Manual

 

53-1003056-01

Page 138
Image 138
Brocade Communications Systems IP250 user manual Click the SNMPv3 Read Only tab, Click the SNMPv1/v2c Read/Write tab