33 IP Traffic analyzer monitoring and sFlow reports

802.1X configuration requirements

802.1X user information can be displayed on sFlow reports. To ensure that this information is displayed, do the following:

Make sure the device and software release it is running supports 802.1X.

802.1X must be enabled on the device ports.

Clients must be running software platforms that support 802.1X (for example, Windows XP operating system).

RADIUS authentication servers must have the 802.1X feature enabled and properly configured.

Displaying sFlow monitoring reports

NOTE

You cannot display sFlow monitoring reports for DCB or ADX devices.

To display sFlow monitoring reports, complete the following steps.

1.Select Monitor > Traffic Analysis > Monitor sFlow.

The Monitor sFlow dialog box displays, as shown in Figure 438 on page 1038.

FIGURE 438 Monitor sFlow dialog box

2.Select a report that has a bar graph icon under Report Available.

For VCS fabrics, the report only displays traffic sampled from the edge ports of the fabric.

3.Click View to display the report.

1038

Brocade Network Advisor IP User Manual

 

53-1003056-01

Page 1090
Image 1090
Brocade Communications Systems IP250 user manual 802.1X configuration requirements, Displaying sFlow monitoring reports