Brocade Communications Systems IP250 user manual Configuring graph options, Minutes Hours Day

IP real-time performance monitoring 33

NOTE

Although these settings will apply to all performance graphics in the management application. the change will not reflect instantly on the Performance Dashboard monitor that displays the graph. Rather it will be updated the next time those monitors are launched.

3.Click Options to launch the Graph Options dialog box. Refer to “Configuring graph options” on page 991 for instructions on using this dialog box.

4.Select the Graph or Table option to display data in graphical or tabular format.

5.Select a time range relative to the present for the display of historical data from the For list. The options are incremental from the last 30 minutes to the last 24 hours.

6.(Historical graphs and monitors only) Select the Plot Min/Max check box to plot minimum and maximum values along with the average data point.

The range between the minimum and maximum values will be represented in a color band surrounding the data points. The width of the color band indicates the variation during the time period. Note that this option is not available if you select Minimum Interval granularity.

7.(Historical graphs and monitors only) Select one of the following options from the Granularity list to set the granularity of the data point to display on the graph:

•5 minutes

•30 minutes

•2 hours

•1 day

NOTE

The graph will not update dynamically if the granularity is 30 minutes, 2 hours, or 1 day. To update, move from one granularity setting to another. The graph will update dynamically when Minimum interval is selected.

8.Select the Events check box to display advanced monitoring service (AMS) violation events received during the chart time range.

9.(Real Time Graphs/Tables and Historical Graphs/Tables dialog boxes only) Click Save as Widget to create a performance monitor published widget on the active dashboard. For instructions, refer to “Configuring a monitor from a performance graph” on page 278.

Configuring graph options

Use the following steps to configure graph options for Real Time Performance Graph display as well as time series monitors on the Dashboard tab or Performance Dashboard.

1.Click Options on the graph.

The Graph Options dialog box displays, as shown in Figure 400 on page 992.

Brocade Network Advisor IP User Manual	991
53-1003056-01