LSP 28

Duplicating an LSP path

When you want to add a new LSP path, you can save work by duplicating an existing path and editing the name and any other parameters you may want to change. You can duplicate an LSP path by taking the following steps.

1.Select Configure > MPLS > LSP.

2.Select the Paths tab.

3.Select the path you want to duplicate.

4.Click the Duplicate button.

The Path Configuration dialog box of the Path Configuration wizard displays (Figure 335). The Name field contains the name of the duplicated path with _Copy appended. Refer to“Adding an LSP path” for a description of how to use the Path Configuration wizard.

Deleting an LSP path

You can delete an LSP admin path by taking the following steps.

1.Select Configure > MPLS > LSP.

2.Select the Paths tab.

3.Select the path you want to delete.

4.Click the Delete button.

The LSP Delete Path Configuration wizard displays (Figure 336).

FIGURE 336 Delete Path Configuration wizard

5. Click on a series of Next buttons to deploy.

Brocade Network Advisor IP User Manual

855

53-1003056-01

 

Page 907
Image 907
Brocade Communications Systems IP250 user manual Duplicating an LSP path, Deleting an LSP path