Brocade Communications Systems IP250 user manual 1079

Schedule PoE power deployment 35

Configuring a one-time deployment schedule

To configure a one-time schedule, complete the following steps.

1.Select One Time from the Frequency list.

2.Select the time of day you want deployment to run from the Time (hh:mm) lists.

Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the day or night value is AM or PM.

3.Click the Date list to select a date from the calendar.

To finish configuring the deployment schedule, return to one of the following procedures:

•To configure an power on PoE schedule, refer to step 10 of “Scheduling an power up deployment” on page 1077.

•To configure an power off PoE schedule, refer to step 10 of “Scheduling a power down deployment” on page 1082.

•To update a PoE schedule, refer to step 10 of “Updating a power deployment schedule” on page 1083

Configuring an hourly deployment schedule

To configure an hourly schedule, complete the following steps.

1.Select Hourly from the Frequency list.

2.Select the minute past the hour you want deployment to run from the Minutes past the hour list.

Where the minute value is from 00 through 59.

To finish configuring the deployment schedule, return to one of the following procedures:

•To configure an enable PoE schedule, refer to step 10 of “Scheduling an power up deployment” on page 1077.

•To configure an disable PoE schedule, refer to step 10 of “Scheduling a power down deployment” on page 1082.

•To update a PoE schedule, refer to step 10 of “Updating a power deployment schedule” on page 1083

Brocade Network Advisor IP User Manual	1079
53-1003056-01