Brocade Communications Systems IP250 user manual Application Configuration Wizard troubleshooting

H Application Configuration Wizard troubleshooting

Application Configuration Wizard troubleshooting

The following section states a possible issue and the recommended solution for Management application Configuration Wizard errors.

Problem	Resolution
Unable to launch the	The Windows Vista, Windows 7,or Windows 2008 R2 system enables the User Access Control (UAC) option by
Management application	default. When the UAC option is enabled, the Configuration Wizard cannot launch. If the Configuration Wizard
Configuration Wizard on	does not launch, use one of the following options to disable the UAC option:
a Windows Vista,	The following are the various ways we can disable UAC in vista:
Windows 7,or Windows	Disable using msconfig by completing the following steps.
2008 R2 system	1	Select Start > Run.
	2	Type msconfig on the Run dialog box and click OK.
	3	Click the Tools tab on the System Configuration Utility.
	4	Scroll down to and select the Disable UAC tool name.
	5	Click Launch.
		A command window displays and runs the disable UAC command. When the command is complete, close
		the window.
	6	Close the System Configuration Utility.
	7	Restart the computer to apply changes.

NOTE: You can re-enable UAC using the above procedure and selecting the Enable UAC tool name in step 4.

Disable using regedit by completing the following steps.

NOTE: Before making changes to the registry, make sure you have a valid backup. In cases where you're supposed to delete or modify keys or values from the registry it is possible to first export that key or value(s) to a .REG file before performing the changes.

1Select Start > Run.

2Type regedit on the Run dialog box and click OK.

3Navigate to the following registry key:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System

4Right-click the EnableLUA value and select Modify.

5Change the Value data field to 0 on the Edit DWORD Value dialog box and click OK.

6Close the Registry Editor.

7Restart the computer to apply changes.

NOTE: You can re-enable UAC using the above procedure and changing the Value data field to 1 in step 5.

Browser troubleshooting

The following section states a possible issue and the recommended solution for browser errors.

Problem	Resolution
The Cancel button does not work on the Report	Mozilla Firefox Browser does not support window close script.
via E-maildialog box when you use the Mozilla	Click the browser Close button to cancel.
Firefox browser.	NOTE: The Cancel button still displays on all Report via E-maildialog boxes.

1358	Brocade Network Advisor IP User Manual
	53-1003056-01