Brocade Communications Systems IP250 Assigning a DCB map to a port or link aggregation group

QoS configuration 16

1.Select Configure > DCB.

The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and functions.

2.Select a switch, and click Edit.

3.Click the QoS tab on the Edit Switch dialog box. The QoS dialog box displays.

4.Select one or more DCB maps.

5.Click the left arrow button.

The selected DCB map row is removed from the list.

6.When you have finished the configuration, click OK to launch the Deploy to Products dialog box.

NOTE

With Fabric OS version 7.0 and later, there is only one DCB map (default), that you cannot delete.

7.Click OK after changing the attributes of the current deployment. The Deployment Status dialog box displays.

8.Click Start on the Deployment Status dialog box to save the changes to the selected devices.

9.Click Close to close the Deployment Status dialog box.

Assigning a DCB map to a port or link aggregation group

The Edit Port dialog box - QoS tab allows you to assign DCB maps to ports and LAGs on a selected switch.

NOTE

QoS maps are created using the Edit Switch dialog box, accessible from the DCB Configuration dialog box.

A port can have either a DCB map or a Traffic Class map assigned to it, but it cannot have both.

1.Select Configure > DCB.

The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and functions.

2.Select a port or LAG, and click Edit.

3.Click the QoS tab on the Edit Port or Edit LAG dialog box. The QoS dialog box displays.

4.Click the Assign a map to <device_name> check box to assign the selected port to a DCB map. If you do not select this check box, all QoS edit features are disabled.

5.Select DCB Map in the Map Type list.

6.Select a DCB map in the Available DCB Maps list.

Brocade Network Advisor IP User Manual	505
53-1003056-01