Brocade Communications Systems IP250 user manual Configuring IP communication

Software Configuration 5

1.Select Server > Options.

The Options dialog box displays.

2.Select Product Communication from the Software Configurations list in the Category pane. The Product Communication pane displays (Figure 69).

3.(Fabric OS and Network OS products only) Select IPv4 (default) or IPv6 to set the preferred IP format.

4.Click Apply or OK to save your work.

Changes to this option take effect after an application restart.

5.Click OK on the “changes take effect after application restart” message.

Configuring IP communication

To configure communication between IP product and the Management application server, complete the following steps.

1.Select Server > Options.

The Options dialog box displays.

2.Select Product Communication from the Software Configurations list in the Category pane. The Product Communication pane displays (Figure 70).

FIGURE 70 Options dialog box (Product Communication pane)

3.To connect to products using SSH, complete the following steps.

a.Select the SSH only option.

b.Enter the connection port number in the SSH Port field. Go to step 6. The default SSH port number is 22.

4.To connect to products using Telnet, select the Telnet only option. Go to step 6.

5.To connect to products using SSH then Telnet, complete the following steps.

a.Select the SSH then Telnet option.

b.Enter the connection port number in the SSH Port field. Continue with step 6.

Brocade Network Advisor IP User Manual	171
53-1003056-01