Brocade Communications Systems IP250 user manual Click Show Ports

35 Schedule PoE power deployment

Viewing the configured ports for a power deployment schedule

To view all ports to which a power deployment schedule is configured, complete the following steps.

1.Select Monitor > Power Center.

The Power Center dialog box displays.

2.Select PoE Products from the View list.

3.Select a port, product, port group, or product group in the PoE Product list and click Schedule PoE On/Off.

The Schedule PoE On/Off dialog box displays.

4.Select the schedule for which you want to view the configured ports from the All Schedules list.

5.Click Show Ports.

The Scheduled Ports [Schedule_Name] dialog box displays.

FIGURE 453 Scheduled Ports [Schedule_Name] dialog box

6.Review the following information:

•Product — The name of the Product.

•Port — The port identifier.

•Name — The port name.

•Status — The Ethernet status of the port. Values include: Up and Down.

•State — The Ethernet state of the port. Values include: Enabled and Disabled.

•Admin State — The PoE administrative state of the port. Values include: On (enabled) and Off (disabled).

•Oper. State — The PoE operational state of a port. Values include: On (connected to a powered device) and Off (not connected to a powered device).

NOTE

The administrative state must be On for operational state to be On.

•Allocation (W) — The amount of allocated power to the port in Watts.

•Consumption (W) — The power consumed by the device connected to the port in Watts.

1084	Brocade Network Advisor IP User Manual
	53-1003056-01