Brocade Network Advisor IP User Manual 763
53-1003056-01
Schedule backup 23
NOTE
The Management application enables you to save the same switch configuration to the repository
using two methods: on demand (Configure > Configuration > Save) or by defining a schedule
(Configuration > Schedule Backup).
To schedule a configuration backup, complete the following steps.
1. Click the IP tab.
2. Select Configure > Configuration > Schedule Backup.
The Schedule Backup dialog box displays.
FIGURE 293 Schedule Backup dialog box
3. Select a backup configuration from the Backup Scheduler list.
4. Click the Edit button.
The Edit Automatic Configuration Backup dialog box displays, as shown in Figure294.
FIGURE 294 Edit Automatic Configuration Backup dialog box
5. Enter the fol lowing infor mation:
Frequency - The interval at which scheduled tasks are to run. The following schedule types
are available:
One Time
Hourly
Daily
Weekly
Monthly
Yearly
Time (hh:mm) - The time of day to run the backup. Options include hour, minute, and AM or
PM.
Minutes past the hour - For hourly backups, select the number of minutes past the hour
from the list.
Day of the week - If you selected Weekly as the frequency type, select the day from the list.