Brocade Communications Systems IP250 user manual Individual IP device discovery

Individual IP device discovery 3

•HMAC_MD5

•HMAC_SHA

d.Enter the SNMPv3 authentication password in the Authentication Password field.

The password can be from 8 through 16 characters long, case sensitive, and allows all printable ASCII characters. The password display as asterisks.

e.Select one of the following privacy protocol types from the Privacy Protocol list:

•None

•CBC-DES

•CFB_AES-128

If you select a privacy protocol, the selected protocol encrypts the SNMP request and response packets.

f.Enter the privacy password in the Privacy Password field.

The password can be from 1 through 16 characters long, case sensitive, and allows all printable ASCII characters. The password display as asterisks.

6.Change the SNMPv3 read only credentials by completing the following steps.

a.Click the SNMPv3 Read Only tab.

b.Enter the SNMPv3 user name in the User ID field.

The user name can be from 1 through 16 characters long, case sensitive, and allows all printable ASCII characters.

c.Select one of the following protocols from the Authentication Protocol list:

•None

•HMAC_MD5

•HMAC_SHA

d.Enter the SNMPv3 authentication password in the Authentication Password field.

The password can be from 8 through 16 characters long, case sensitive, and allows all printable ASCII characters. The password display as asterisks.

e.Select one of the following privacy protocol types from the Privacy Protocol list:

•None

•CBC-DES

•CFB_AES-128

If you select a privacy protocol, the selected protocol encrypts the SNMP request and response packets.

f.Enter the privacy password in the Privacy Password field.

The password can be from 1 through 16 characters long, case sensitive, and allows all printable ASCII characters. The password display as asterisks.

7.Change the SNMPv1 and SNMPv2c read-write credentials by completing the following steps.

a.Click the SNMPv1/v2c Read/Write. tab

Brocade Network Advisor IP User Manual	89
53-1003056-01